Practical Solution for upgrading and repairing wireless route linksys

Source: Internet
Author: User

A practical solution for wireless route linksys upgrade and repair. in the Internet era, you will often encounter the problem of wireless route linksys upgrade. The following describes how to upgrade the wireless route linksys, including how to download the firmware.

The wireless router will be locked if the standby time is too long. Specifically, when the computer connected to the lower end of the router does not perform network operations for a long time, the router enters the STANDBY state. However, when the computer is restored, the router cannot be recovered to the working state. No matter whether the computer sets DHCP to automatically obtain the IP address or manually set the IP address, it cannot be connected to the router, or PING the path.

The new WRT320N firmware V1.0.02 released by LINKSYS comprehensively solves this problem. We downloaded the new firmware from the LINKSYS official website. Under normal circumstances, we upgraded the wireless router firmware on the Wireless Router WEB management interface.

LINKSYS is available on the China official website for free wireless route linksys upgrade

We first download the latest firmware from the LINKSYS official Chinese website for use during the upgrade. After downloading the firmware file, decompress it into a relatively easy-to-find folder, for example, in this upgrade, We will decompress it to the router folder of drive C.

Wireless route linksys upgrade Interface

The factory IP address of WRT320N is 192.168.1.1. The default Administrator account and password are all: After admin enters the management interface, select the "firmware Upgrade" option under the "Administration" project, click the Browse button to find the downloaded Upgrade file from the C drive router folder and click "Start to Upgrade" to Start the Upgrade. the Upgrade process generally takes about two minutes and cannot be interrupted. After the upgrade, the wireless router will automatically restart.

Old wine is anxious. After waiting for two minutes, I will manually restart the vro. As a result, after the restart, the vro power indicator will not stop flashing, The vro management interface will not be able to enter, and the routing function will not be enabled. Failed to upgrade the vro. I turned it into a brick. It is estimated that some netizens have also met this situation. In the past, we generally used to return the route to the factory for repair. Now, don't worry. You can use the TFTP Command to send the firmware file to the vro to continue the upgrade.

Wireless route linksys upgrade: Change the computer IP address to the firmware IP Address

First, we connect the computer with a network cable to the lanport of the wireless router, and modify the IP address of the computer to the same network segment as the router, for example, if the initial IP address of WRT320N is 192.168.1.1, we can set the IP address of the computer to 192.168.1.2 ~ 254.

Wireless route linksys upgrade: Enter the doscommand Interface

Click "run" in the "Start Menu" And Enter CMD To Go To The DOS command interface. Then, go to the folder router where the firmware file for upgrade is saved. The downloaded firmware file WRT320N is displayed. BIN is ready to perform the next operation. In the ROUTER directory, enter the doscommand tftp-I 192.168.1.1 PUT WRT320N. bin.

Wireless route linksys upgrade: Use the tftp Command to send the firmware file to the router.

After the following response appears on the screen, wait for two minutes after the router restarts automatically to complete the entire firmware transmission and upgrade process. The power indicator is also on normally. At this time, you can log on to the Wireless Router WEB management interface again. So far, all the upgrade processes have been completed. If the upgrade fails, you can repeat the above steps. In addition, you can use the TFTP Command to send the router firmware to fix the damaged wired and wireless routes. This is not only applicable to the wireless linksys upgrade product.

It is also suitable for some models of wired and wireless routers such as network, D-LINK. However, you must note that some products need to distinguish between models and hardware versions. For example, the LINKSYS classic model WRT54G has eight or nine hardware versions, their firmware files are different. Therefore, before downloading the firmware files, you must first find out which product you have purchased. Generally, the product model labels on the back of the route are marked. Do not make any mistakes.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.