Preparations before setting a universal Router

Before setting up a universal router, if you want to set up a router to access the Internet, you must enter the router to set up the router. Today, we will introduce the preparations before setting up the universal router, for more information, see. 1. Confirm the connection method www.2cto.com. First, we need to confirm the broadband access method. The fastest way is to consult the broadband provider. You can also learn your broadband access method through the broadband access method, 1. Telephone Line-adsl modem-computer ADSL dial-up number: run a third-party dialing software or a dialing program that comes with the system on the computer, and fill in the account and password provided by the broadband provider, dial-up is required before each Internet access, or the adsl modem has enabled the routing function. Enter the account and password provided by the broadband provider to enable automatic dial-up.
2. Ethernet cable-PC static IP Address: the ISP provides a fixed IP address, subnet mask, default gateway, and DNS. 3. Cable TV-Cable MODEM-computer dynamic IP Address: the TCP/IP attribute of the computer is set to automatically obtain the IP address, and the computer can access the Internet each time it starts; WEB Authentication: Open IE browser before each Internet access, go to the home page specified by the broadband provider, enter the user name and password provided by the broadband provider, and perform other Internet operations only after authentication. 4. Optical Fiber-photoelectric converter-Proxy Server-computer. 802.1X + static IP: the broadband provider provides fixed IP addresses, dedicated dialing software, accounts, and passwords. 802.1X + Dynamic IP: the broadband provider provides dedicated dialing software, accounts, and passwords. 5. The connection authentication methods mentioned above are only some broadband access methods with high penetration rates. Of course, there will be other topological connections and authentication methods, if you do not know your connection method, it is best to consult your broadband provider.
2. Enter the vro management interface www.2cto.com 1. Connect the adsl modem, TP-Link router, and computer. If you are not clear about it, refer to the instructions, use a network cable to connect the LAN port of the TP-Link router to the computer Nic. 2. Because the Ethernet port on the TP-Link router has the polarity auto-flip function, you can use a direct line or crossover line regardless of the network cable. You only need to ensure that the crystal head of the network cable is correctly created without any damage. 3. Management address of the TP-Link router factory default: IP Address: 192. 168. 1. 1, subnet mask: 255. 255. 255. 0. 4. Right-click "Network Neighbor" on the desktop, and double-click "open local connection"> "properties"> "Internet Protocol (TCP/IP)"> "double-click" Internet Protocol (TCP/IP.
5. In this window, select "automatically obtain IP Address". You can also manually enter the following IP address, and enter "IP Address: 192" in the corresponding position. 168. 1. X (range 2-254) subnet mask: 255. 255. 255. 0 Default Gateway: 192. 168. 1. 1. The preparations for setting the TP-Link router have been completed. you can log on to the TP-Link router and set the connection.