Pro WiFi connected to the computer to access the internet !!!

WiFi connected to the computer to access the Internet !!!

1. Modify ipenablerouter in HKLM/comm/TCPIP/parms of the Registry to 1 (originally 0)
2. modify disabledonboot under HKLM/comm/connectionsharing in the Registry to 0 (originally 1), enableaddresstranslation to 1, and privateinterface to enter rndisfn1 (originally blank ), publicinterface tiacxwln1 (originally empty ).
3. restart your phone, connect your computer to your phone using USB, disable the USB option of ActiveSync, and manually set the local connection of your computer (note the connection with your phone. different DNS regions, I use the DNS of Jiangsu Wuxi Telecom) IP address, connect to wifi, and test the WiFi network must pass.
4. Set the local connection to the mobile phone: Address 169.254.2.2 subnet mask: 255.255.255.0 Default Gateway: 169.254.2.1, and set the DNS as local.
5. Now that I can access the Internet on my computer, I have passed the 577 wm6 test (Note: Do not run Internet sharing, he modifies the Registry)

There are many methods on the Internet, but most of them are not suitable for P800. After testing, you can simply follow the steps below to ensure that the PPC synchronization is not enabled in a Wi-Fi environment, remove the ActiveSync USB connection from the computer,
First, you need to change the key values of the PPC registry:
1. Change ipenablerouter in HKLM/comm/TCPIP/parms to 1;
2. Change disabledonboot under HKLM/comm/connectionsharing to 0;
Enableaddresstranslation is 1;
Privateinterface this is to be set to rndisfn1 (Case Insensitive)
Publicinterface: Set it to tnetwln1. (case-insensitive)
3. Stop all other NICs with multiple NICs
4. Restart PPC and connect the computer to PPC through USB. Generally, ping the computer after connection.
The ping method may be redundant, but let's talk about it: Start> RUN> Enter cmd> Ping 169.254.2.1
5. Set the DNS address (my name is 219.141.136.10 in Beijing and my name is 219.141.140.10 in standby). If you have any questions, call local 10000 (regardless of China Netcom Telecom)
DNS setting method: after connecting to the USB, the PC should have a new local connection, right-click> Local Connection> Properties> double-click Internet Protocol> use the following DNS (if no DNS is set, the webpage cannot be opened)
6. Connect to the WiFi and test that the Wi-Fi network must be connected.
7. Now that I can access the Internet on my computer, I have passed the P800 test (Note: Do not run Internet sharing on PPC, it will damage the registry we set up)