Problem about Philips spark2 flash failure

Many users are prompted to fail to use the official Philips flash Brush tool songbird. Then you can no longer start the machine.

At the same time, when you use songbird to restore the MP3 firmware, an error is reported and cannot be performed. I am no exception.

The following describes the recovery steps.

Download the following tool:

Click Open Link

Note that I cannot run this command on Windows 8 64-bitProgram. Later, it was run on win7.

Then, put the firmware. SB firmware of PHILIPS spark2 in the program's directory of the same level (for details, click View information on the software to view the image directory address ).

If you do not have the firmware. SB file, you can search the software installation directory or drive C of songbird. When you use songbird to restore the factory settings, the firmware is downloaded locally by default.

After the software is turned on, press the volume + key of PHILIPS spark2 and then insert the USB interface. The software will automatically search for and detect spark2. When the start button below is on, you can click Start to forcibly write the firmware to spark2.

Based on feedback from netizens, check the following options.FormatOtherwise, it cannot be opened.

In addition, when I first write data, an error is reported because of data redundancy. However, you can see the language selection interface of the Philips logo. I wrote it again later, restoring it perfectly.

I had to vomit about the Upgrade Program of PHILIPS MP3, and an error occurred several days after I bought it. I guess I won't purchase Philips MP3 any more in the future.

Reprinted please indicate the source:

Http://blog.csdn.net/ml3947