Problems and Solutions of wireless network card cracking in Atheros AR5007EG

Tip: Atheros AR5007EG is supported by BT3 and can be captured, injected, or cracked by wlan. I only provide a solution to the problem and do not provide detailed cracking procedures.

The difficulty in this article is the problem of the wireless NIC Driver of the Atheros AR5007EG. I believe many netizens have problems with this. This Nic is indeed not very good and the signal is unstable, however, it does not affect the wireless password cracking.

The following describes some common problems with this NIC:

1. spoonwep cannot be used in the BT system to crack

 

2. aircrack-ng cannot be cracked in the BT System

3. In Windows, AiroWizard cannot be used.

4.
In Windows, aircrack-ng cannot find the NIC

5. The above are some of the frequently asked questions I have found. For more questions, please submit them to me.

First, go to the BT system, open the shell, type ifconfig-a, and press enter as follows.

Ath0/* indicates the built-in Nic */
Eth0/* Indicates a wired Nic */
L0
Wifi0

/* Indicates the wireless Nic */

Then input the command airmon-ng start wifi0 6 in shell (6 is the channel) and find an additional ath1 (my name is ath1, if you do not want to change freely according to your situation), you can enter airodump-ng ath1 after ath1. After Entering SPOONWEP, select ATH1 for the NIC. The first problem is solved.

The second problem is that aircrack-ng cannot be run under BT. In fact, this is not a problem. Let's start with a few commands. First, type ifconfig-a in shell and press Enter, the displayed information is the same as in the previous issue. Continue to type airmon-ng start wifi0 6 and then an ath1 occurs. Activate the NIC and type in the shell: ifconfig ath1 up then we start to capture packets and type airodump-ng -- ivs-w name-c 6 ath1 (name is the name and can be changed without affecting the results ).

The third problem is that many people do not get used to the BT system. LINUX is very complicated. In fact, there is no difference in use habits. There are also a lot of software to crack wireless in Windows, but the methods are the same, I also met the problem that airowizard cannot be used for the first time. packet capture is hard to understand. Many people have abandoned this method. This problem does have a driver problem, first, download a CommView for WiFi software. The version and model are of course the latest, so I will not write the model, as for the purpose of the software, you can search for it on the Internet. It is also a method for cracking wifi in Windows. After installing the software, right-click my computer and choose "manage"> "Device Manager"> "network adapter, check that the wireless NIC Driver is CommView Atheros AR5007EG. restart the computer and use Airowizard.

The fourth problem is that aircrack-ng in Windows is still quite useful, not as bad as it is on the Internet. First, enter airserv-ng in CMD to view the parameters and explanations, and then type: airserv-ng-d "commview. dll | debug "or airserv-ng-d" commview. dll | {my adapter id }". The difficulty is that many people say that they cannot find the network card and cannot continue. The solution is the same as the third problem. Install the CommView for WiFi software and try again, it should be able to run perfectly.

These are the solutions to the above problems. If you have better solutions and other problems, please feel free to contact me and I will help you solve them in time.