This project is to pay for China Telecom wing to build Orange cloud in Nanjing, mainly to share with you the VMware vsphere6 +vsan private Cloud building.
1.1. Building goals
This is a storage environment provided by 800 NF5885 M4 host servers through Vsan storage virtualization software, using VMware vSphere6.0 and Vsan for virtualization. 2. Installing ESXi6.0
Deploying through IPMI into the system
Select virtual drive → image file → Select the ESXi6.0 custom for HP image file to mount.
Power on the server to install.
After the boot is complete, select the ESXi disc, enter
Enter installation Welcome screen, enter
Press F11 to accept the Software license protocol,
Installation location selection, default, enter
Select keyboard type, enter
Enter the system password, return
Installation confirmation information, press F11
Installation complete, enter, restart the machine
Press F2 to enter the configuration management network
Select Configure Management Network, enter
Select IP Configure, enter
Enter IP, mask, gateway, enter, confirm network modification information, press Y to confirm 3. Install vcenter installation 3.1. WINDOWS2008R2AD domain creation Install DNS server
Open the administration console and select the Add Roles Wizard
Selecting a DNS server for installation
Default settings, Next
Select Install, Next
Install Ad Server
Run Dcpromo.exe under Windows system, install Active Directory Domain Services
Default settings, Next
Default settings, Next
Here you select an existing forest to create a new domain name, or you can join an existing forest based on the environment, here is the new domain name environment, so we create the principle in the New Forest
Enter the domain name here, enter the relevant domain name as required, click Next
Choose the version of Windows R2 here, it is recommended to use R2, otherwise choose according to the system version
Default settings, click Next
A warning appears, click Yes to continue
Here is the database, log file, sysvol file save path, generally do not modify, default settings
Here the password is used for ad Restore mode, enter the password next, complete the setup, and the system restarts.
Restart the server when finished
Log on to the ad server with a domain user
After a restart, use a domain user to log on to the Ad server for all hosts to join the cluster
Log on to all host nodes, on the computer name/domain Change page in the system settings, fill in the domain name, enter the local user name password, and then restart, log in with the domain user
3.2. Windows SQL2008R2 Database Installation Insert Disc
Install the necessary plugins
After booting from the disc, follow the prompts to install the necessary. NETFramework
To install a language pack:
Click Install to start the installation process
Environmental inspection:
Enter the key:
Click Install, install the necessary files
Installing the Database
Perform a pre-database check to confirm that the firewall is actually shutting down
Confirm the installation type:
Here is the name of the instance that fills in the database, as shown in the example, complete, click Next
Here to verify that the database installation disk space is sufficient, click Next
Select a service account here, as shown in, select Next
Use Mixed Mode as authentication
Default settings, Next
Default settings, Next
Click Install, then close
Database setup for Vcenter
Connecting to an instance of Vcenter
Select a new database in the database
Enter the database name as planned
New database complete. 3.3. Installing vcenter Configuration ODBC
Before installing vcenter, you need to download the 64-bit SQL Native client from the Web and install it
Install the legend selection and go to the ODBC configuration interface
Select by diagram, configure ODBC
Enter a name and server where the server should be resolved with the domain name
Enter user name SA and password
Select the database table space, select Next, click Finish
Click Next to test the connection
Click OK to finish. vCenter6.0 Installation
After the ISO file is hooked up, double-click the disc in the system, and then select "Vcenter Server for Windows", click Install
In the, click Next
Select Accept User agreement, click Next
Select the mode of the PSC and Vcenter same host in the deployment type. Click Next.
This mode is suitable for most users.
Enter a name at the system Network name and click Next
Configure the SSO account password and site name, click Next
In the default selection, click Next
In the database setup interface, configure the external SQL database
Default port information, click Next
Select the Software installation location and click Next
Confirm the installation information and click "Install"
Wait 15-30 minutes for the installation to complete, for example, click Finish.
Vsan configuration 3.3.1.1. ESXi host New Vsan Network
First log in to the Web Client interface, select the ESXi host,
After clicking on the Vsan Network, edit the settings to enter, tick the Vsan traffic, as
3.3.1.2. Open Vsan
Select Management in the cluster, click Edit under the Virtual San tab
Tick Open Virtual San
3.3.1.3. Adding a disk group
Click Disk Management → create a new disk group
Add Flash and HDD
Add the hard drives of all the servers in turn to 3.3.1.4. Add a virtual machine storage policy
Click Create new virtual machine Storage Policy
New Virtual machine policy name
Create a rule set
Finish creating
4. Implementation summary
The deployment of this project, in the leadership of the care and strong support, in line with the program requirements to complete the project deployment, installation, commissioning work.
Project case sharing-vmware private cloud (share 2)