PS Reserved details post-processing HD portrait

This PS tutorial brings Photoshop to beautify HD portrait photography. The idea of beautifying the picture in the tutorial is very good. First use the Liquefaction tool to treat the face, such as the perfect treatment, and then use the repair brush with the stamp tool to eliminate the big face flaws, and then use hyperbolic or neutral gray to protect details of the skin;

Original

Figure 01

Final effect Diagram

Figure 02

1, the model for the appropriate liquefaction, in the liquefaction of the time it is hoped that everyone look carefully, each part should be optimistic, big to the face, small to the pupil, we have time really can study more liquefaction, really very important!

I repair the first step of the diagram is often first liquefied, not liquefied to a certain extent will not continue to go down! So liquefaction this step must be strictly.

Figure 03

2, the use of repair brush on the face of the general modification of the skin, here also includes the small white dots on both sides of the nose, patience and patience to slowly repair it! Now that you're talking about this tool, by the way, the hardness of 0 or 100 doesn't matter. I personally always use 100.

Figure 04

Figure 05

3, continue to proceed, this step is the universal imitation stamp tool, friction friction. The highest level of the stamp tool is to use the stamp as a paintbrush! Dear fans, Let's have a good look.

Figure 06

Figure 07

4, to this step should play the techniques of light and shade repair, curve repair map! I am a nostalgic person, I just contact the repair map that will not have the word neutral ash, my method comparison. But the individual still likes to use! (OK this place needs to talk to my fans to see the whole!) Remember to look at the whole! Think about this sentence, I and each of my students will say, if you can understand this phrase believe you must have a great technical progress!).

Figure 08

Figure 09

5, to the fifth step, we began to enter the early color palette control, here are the inspection of light and shade, painting of light and shade, contrast control. What about the light and shade? That is to choose a more suitable brightness for this picture. Other I will not say more, we should all understand.

Figure 10

6, then the initial work of color matching we have done, the following began to enter the color stage, for the choice of colors, is according to the other several makeup to set the color, because it is a group of colors of course can not be very far away, plus the time to take this set of film smoke. But the smoke was in the back, and there was some smoke material here to get the smoke to the front. The next idea is to make the picture look a little bit darker blue.

Figure 11

7, color palette of this group of colors I will not give you screenshots, I believe you have seen the parameters will not have any much use, here I can tell you in the color palette of the 2 points to note! The first is to adjust the color must be stable, what is "stability" that is, each of the colors of a palette tool must be controlled, as little as possible , of course, sometimes in order to out color may want to adjust a little more!

The second note is to adjust the color; Learn to put all the color layer off and then one point to see which layer of your color is the most influential, then the color of the layer must be appropriate to reduce the point! The above considerations are also my usual color when the requirements of their own! I hope you can use it for reference.

Figure 12

Final stamp sharpening to complete the final effect:

Figure 13

Note : More wonderful tutorials Please pay attention to the triple Photoshop tutorial section, triple PS group: 182958314 welcome you to join

Category:

• PS Image Processing
• PS Post-processing tutorial