PS turn blurred eyes into watery hand-painted eyes tutorial

Final effect

Open the original material, appropriate skin and color. You can be satisfied.

2, the background layer to copy a layer, execution: filter > Liquefaction, with the expansion tool to change the eyes larger, the effect is as follows Figure 2.

3. Use the Elliptical marquee tool to hold down the SHIFT key to make an eye selection, with a strength of 20, a hardness of 0 of the smudge tool from the outside carefully smear, and deepen the tool appropriately. Press CTRL + Shift + I to select, and then the external smear, smear the time to be careful, so that the purpose of the operation is to sharpen the contour of the eye, the whites can be clearer, the effect of the following figure 1. 4, at this time the constituency is still not canceled, press CTRL + Shift + I return, with the Dodge tool to the iris of the eye treatment, the pupil and the edge of the surrounding to deepen treatment, the effect is as follows Figure 2.

5, at this time the edge of the eyeball is too sharp, and then use the fuzzy tool to deal with slightly. 6, with the elliptical marquee tool in the eye selection of an elliptical selection, as shown in Figure 1, press CTRL + ALT + D to feather 3 pixels. Execution: Filter > Noise > Add noise, the value is 9, monochrome, evenly distributed, the effect is shown in Figure 2. 7, do not cancel the selection, implementation: Filter > Blur > Radial blur, Quantity: 100, Zoom, best. Remove the selection after the appropriate use of deepen, Dodge tool to the pupil and iris correction, the effect is as follows Figure 3.

8, respectively check out the eye line, double eyelid, under eyeliner, Canthus and eyelash path, the following figure. Note that paths are set up separately. Eyeliner and other paths can be ticked a little longer.