Puling tl-wdr7500 Router setting limits network speed

　　 tl-wdr7500 router set limit speed diagram Step one, limited speed (IP broadband control) settings

If one of the users to download files, browsing video, will occupy a large number of broadband resources, so that other users of the network is very slow, so restricting the speed (IP broadband control) is very necessary.

TP-LINK-TL-WDR7500 Wireless Router

Example analysis

2 users jointly financed the 4M ADSL broadband, as an example to ensure the speed of each user, decided to 4 of the broadband to distribute evenly, each person can only use 2M of broadband resources.

1, click "IP Broadband Control"--> check "Open IP Broadband Control"--> "Broadband Line type": ADSL line (if you are not ADSL broadband, select other lines)--> "Uplink total broadband" fill:512--> "downlink total Broadband" Fill in the:4096--> and click "Save".

Enable IP Broadband control on the tl-wdr7500 router

Pay attention to the problem

(1), 1kbps=8kbps,1m=1024kbps=128kbps; so 4m=4096kbps.

(2), broadband operators and routers to calculate the size of the broadband unit is Kbps, and the computer is Kbps, so 1M broadband, download files, the maximum speed displayed on the computer can only be about 100KBps, while the router is showing 1024Kbps.

(3), downlink Broadband: Refers to the maximum speed when downloading, we handle the broadband resources, in fact, according to the largest downlink broadband to determine. For example, to handle the 4M broadband, then the largest downlink broadband is 4096Kbps.

(4), Uplink broadband: upload resources When the broadband, is generally downlink broadband 1/8; For example, 4M Broadband, downlink broadband size is 4096Kbps, then the largest uplink broadband should be: 512Kbps.

2. Click "Add New Item"

Add an entry for IP broadband control (limited speed)

3, "Start address" fill:192.168.1.2--> "End Address" fill in:192.168.1.254--> "Maximum downlink broadband" Fill:2048--> click "Save".

　　tl-wdr7500 Router set limit speed diagram Step two, IP Broadband Control parameter settings

Pay attention to the problem

1, each allocation of 2M broadband, 1m=1024kbps; so, 2m=2048kbps.

2, we usually surf the internet, almost on the download data. Therefore, only need to set a maximum "downlink broadband" on it, the other does not have to set the matter.

4, check the speed limit settings: Click on the left of the "IP Broadband Control", you can see just set the IP broadband control entries.

Check whether the IP broadband control (limited speed) setting is successful

To the end of the Tp-link tl-wdr7500 router to complete the limited speed (IP broadband control) settings, for each user average distribution of 2M network speed. Users downloading files, watching video online, will not affect another user's normal access to the Internet.