Puling tl-wr842n Router How to set limit speed

tl-wr842n Router set limit network speed step one, demand analysis

2 users jointly financed the 4M ADSL broadband, in order to ensure their use of the router when the speed, the decision on the 4M of the average distribution of broadband, each person can only use 2M of broadband resources.

Puling tl-wr842n Router set limit speed step two, limit the speed setting

1, click "IP Broadband Control"--> check "Open IP Broadband Control"--> "Broadband Line type": ADSL line (if you are not ADSL broadband, select other lines)--> "Uplink total broadband" fill:512--> "downlink total Broadband" Fill in the:4096--> and click "Save".

Pay attention to the problem

(1), 1kbps=8kbps,1m=1024kbps=128kbps; so 4m=4096kbps.

(2), broadband operators and routers to calculate the size of the broadband unit is Kbps, and the computer is Kbps, so 1M broadband, download files, the computer display the maximum speed of only about 100KBps.

(3), downlink Broadband: Refers to the maximum speed when downloading, we handle the broadband resources, in fact, according to the largest downlink broadband to determine. For example, to handle the 4M broadband, then the largest downlink broadband is 4096Kbps.

(4), Uplink broadband: upload resources When the broadband, is generally downlink broadband 1/8; For example, 4M Broadband, downlink broadband size is 4096Kbps, then the largest uplink broadband should be: 512Kbps.

2. Click "Add New Item"

3, "Start address" fill:192.168.1.2--> "End Address" fill in:192.168.1.254--> "Maximum downlink broadband" Fill:2048--> click "Save".

4, check the speed limit settings: Click on the left of the "IP Broadband Control", you can see just set the IP broadband control entries.

At this point, the completion of the Tp-link tl-wr842n Router Limited speed (IP broadband control) settings, for each user averaged 2M of speed, to avoid the network card, slow speed of the situation appeared.