Puling tl-tr961 5200L Basic Internet how to set up

General tl-tr961 5200L Basic Internet Setup First step, install Uim/sim card

Long press the power button to start the router, open the SD card slot, insert the SIM card.

Puling tl-tr961 5200L Basic Internet Settings, the second step, operating computer settings

1, set up operating computer network parameters

Please set the wireless network card of the operation computer to obtain the IP address automatically

2. Connect the wireless Signal

The computer searches the router's wireless signal tp-link_4g_xxxxxx (six digits after the MAC address) and connects

Puling tl-tr961 5200L Basic Internet set up the third step, landing router management interface

1, enter the administrative address

Open the browser, empty the address bar after entering tplogin.cn, enter.

2, Login Management interface

In the Login password box set the administrator password, and in the confirmation password again input, click Confirm.

Puling tl-tr961 5200L Basic Internet Setup Fourth step, follow the Shenzhen Wizard to set up the router

1. Set the dialing configuration

Enter the router management interface, the router will automatically detect the inserted SIM card, dialing parameters remain the default, directly click Next.

Note: If the 4G operator has specified dialing parameters, then click New, and fill in the corresponding location parameters respectively.

2. Set Wireless parameters

Set the wireless name and wireless password, the default wireless band is 2.4GHz, set complete click Next.

Note: Wireless bands can only be selected in 2.4GHz and 5GHz and cannot work at the same time.

3, complete the setup

Click Confirm, the router Setup is complete and will automatically reboot.

After the router reboot is complete, view the 4G status in the OLED screen, and if there is a small earth icon in the following illustration, the connection is successful. The wireless signal set on the wireless Terminal connection (in this case Zhangsan) provides access to the 4G network.