Puling tl-wdr5600 how to upgrade firmware

General tl-wdr5600 Upgrade firmware considerations

(1), before the upgrade operation, please connect the computer with the network cable and Tp-link tl-wdr5600 router, do not use the wireless way to connect

(2), the firmware upgrade process, the need to ensure the stability of the router power supply, in the process of upgrading must not power, or damage your Tp-link tl-wdr5600 router.

(3), firmware upgrade is generally to improve the router for some special environment, application support, if the Tp-link tl-wdr5600 router is used normally, do not recommend that you upgrade.

Puling tl-wdr5600 Upgrade firmware diagram Step one, download Tp-link tl-wdr5600 upgrade firmware

1, view the tl-wdr5600 router version

You can find the Ver (that is, the version/version) in the serial Number column on the label at the bottom of the tl-wdr5600 router, which is the hardware version. The following figure.

Important Notes

At present, the tl-wdr5600 routers have V1.0 and V2.0 two versions, in the upgrade, you need to download the corresponding hardware version of the upgrade file to complete the upgrade operation. If you upgrade file download errors, you will not be able to complete the upgrade operation.

2. Download firmware

Go to the website of the General Union to download the corresponding model firmware

Pay attention to the problem

Depending on the version you see above, on this page, select the upgrade file that corresponds to your own version of the tl-wdr5600 router.

3, extract the firmware

Download the file is a compressed package, need to decompress the software to extract, after decompression, you can see a. bin suffix file, this is Tp-link tl-wdr5600 upgrade firmware.

Puling tl-wdr5600 Upgrade firmware diagram Step two, Tp-link tl-wdr5600 firmware upgrades

1, login to the tl-wdr5600 Settings page

In the browser input: tplogin.cn Open the login page, and then enter the login password, enter the Settings page.

2, tl-wdr5600 upgrade firmware

In the TL-WDR5600 settings interface, click "Advanced Settings"--> "Device Management"--> "software Upgrades", will appear as shown in the following page and click "Browse" to find the computer after decompression. bin firmware file--> then click "Software Upgrades".