General tl-wdr7500 Router port forwarding settings Step one, set up the computer IP
You want to access your home computer via Remote Desktop, but your computer is connected to a router, and you cannot access the computer after you enter the router's WAN IP address.
Workaround: Set port forwarding rules at home routers and forward Remote Desktop requests to internal computers.
1, Remote Desktop uses the port number is: 3389.
2. When setting the port mapping, the user should first figure out what port number to forward. Port number and the use of software, services related to the specific Baidu can query their own use of the service port number.
Before setting the port forwarding rule, you need to set the IP address of the computer in the Xiao Wang home, this example is 192.168.1.2. The following illustration shows:
Set the computer IP address to a fixed IP address
Pay attention to the problem
Users themselves set the computer IP address, DNS server address, please check your router's WAN port status display information to fill out, as shown in the following figure:
View DNS server addresses on the router
Puling tl-wdr7500 Router port forwarding settings Step two, set port forwarding (virtual server)
1, in the tl-wdr7500 router settings interface, click the "Forwarding Rules"--> "virtual Server"--> and then click "Add New Entries"
To add a port forwarding rule on the tl-wdr7500 router
2, add 3389 port forwarding rules
"External Port good" fill in:3389--> "Internal port number" fill:3389--> "IP address" fill:192.168.1.2--> "Save"
Set port forwarding rules on tl-wdr7500 routers
3, check whether the rule is effective: Click the "Forwarding Rules"--> "virtual Server" to see just added the rule status.
Check settings for port forwarding rules
Puling tl-wdr7500 Router port forwarding settings Three, verify the virtual server settings
Open the Remote Desktop Connection program in your computer, enter the router WAN port IP address, connect, and if you can access the computer at home, the setting is successful.