Puling tl-wr742n How to change the password

tl-wr742n View initial password diagram

Tp-link TL-WR742N Wireless router's initial password (default password) is: admin; The default logon username is also: admin; The default login address is: 192.168.1.1

Almost all manufacturers of wireless router products, at the bottom of the router has a label, which will give the router set the URL, the default login username and default login password, as shown in the following figure:

So please look carefully at the label at the bottom of your router, which already gives the appropriate information.

Puling tl-wr742n Password Change method one, wireless (WiFi) password

Wireless password is a wireless terminal (mobile phone, notebook) to connect the wireless signal needs to enter the password. Wireless router default state, wireless signal does not have a wireless password. The way to change the wireless password is as follows:

1, Login Management interface

Open the browser, empty the address bar, enter tplogin.cn (part of the router for 192.168.1.1), in the pop-up prompt box to enter the management password, the following figure:

Note: The admin password is set by the user, if you forget the password, please reset the router and reset the factory settings.

2, set the wireless password

After entering the management interface, modify the wireless password on the right side of the interface, click Save, and the new wireless password takes effect immediately.

Note: The password length is 8~63 bit, it is recommended to use a combination of numbers or letters.

Part of the old version of the router, set up or modify the PKS password in the wireless settings >> wireless security Settings interface, after the settings are complete, click Save. Some routers need to reboot after the settings to take effect, follow the page prompts.

Note: If you only modify the password and do not modify the wireless name, then the terminal that has previously connected the signal will need to remove the wireless profile before the signal can be properly connected.

The method of Puling tl-wr742n changing password Two, change the management password of the router

Managing passwords is the password that you need to enter when you log on to the router management interface.

How to modify: Login router interface, click Routing settings >> Modify Administrator password, enter the original login password, set up a new management password, click Save, the following figure:

Some model routers in the management interface of the system Tools >> Modify Login Password interface changes, according to the page prompts after the settings, click Save.

The method of Puling tl-wr742n Change Password Three, change the internet broadband password

Broadband password is a broadband dial-up access to the password, by the broadband operators (telecommunications, unicom, etc.) to provide, in the router can only enter your broadband password.

Set up method: Login Router interface, click Routing Settings >> Internet settings, Internet access to choose broadband dial-up Internet access, input broadband account and broadband password, click on the connection, waiting for IP address to obtain success.