Puling tl-wr886n V2-v3 How to set up a virtual server

tl-wr886n v2-v3 Set Virtual Server step One, example list

On the bottom tab of the TL-WR886N router, locate the Ver (that is, the version/version) in the serial number column, which is the hardware version. The following figure.

Check Hardware version

A small enterprise uses the tl-wr886n router to connect to the Internet, and constructs the web, FTP, mail and other servers in the intranet. However, users on the Internet cannot access the web, FTP, mail, and other servers in the content, and you can set up a virtual server on the tl-wr886n router to resolve them.

Tp-link tl-wr886n Virtual Server application topology

Puling tl-wr886n v2-v3 Set Virtual Server step two, requirements analysis

You need to set the IP address of the Web, FTP, mail server to a fixed IP address, and then you need to figure out the port number used by the Web, FTP, mail service, as shown in the following illustration.

Parse the port number that needs to be mapped, server IP

Puling tl-wr886n v2-v3 Set Virtual Server Set virtual server on step three, tl-wr886n

1, check the server-related settings

(1), the server's IP address, to be set to a fixed IP address, gateway for the TL-WR886N router LAN port IP address, as shown in the following figure. If you do not know how to set up, you can click to read the tutorial computer static (fixed) IP address settings method.

(2), the proposed Shutdown server (computer) on the firewall, anti-virus software.

(3), confirm other computers in the local area network, can access the corresponding service through the server's IP address.

2. Start Setup

Login to the TL-WR886N admin interface--> Click "Forwarding Rules"--> "virtual Server"--> and click "Add New Entry"

Click "Add New Item"

3. Add mail Server rules

Fill in the mail server's service port number (open port)--> "Internal Port number" (Server actual port)--> "Server IP Address"--> then click "Save".

Send mail (SMTP25 port)

Send mail port mapping settings

Receive mail (POP3110 port)

Receive mail port mapping settings

Warm tips

The service port number service port number is the open port, which is the port used by the Internet access server.

3. Add Web Server rules

Web Service port Mapping

Important Notes

The service port number can be set on its own (if change is required, it is recommended to be set to more than 9000). No special needs, please match the service port number with the internal port number.

4, the confirmation rule is enabled

Click the "forwarding Rule"--> "virtual Server", as shown in the following illustration to indicate a successful creation.

Check that the TL-WR886N virtual server settings are successful

Puling tl-wr886n v2-v3 Set Virtual Server step four, test virtual server settings for success

Depending on the above settings, clients on the Internet access the 121.202.33.100 (WAN IP address) through the mail client software to access the mail server. The Web server is accessed through the browser in the following form

Pay attention to the problem

If your broadband is not a static IP address, you can apply for the domain name account in "Dynamic DNS" and login to the account in the router, and then use your domain name and open port number to access the server after you log in.