PXE started PE successfully

PXE started PE successfully

 

From: http://gaokun163.blog.163.com/blog/static/17689972008101704742668/

Note: PXE (preboot execute environment) is the latest technology developed by Intel. It works in the client/server network mode and supports workstation downloading images from remote servers over the network, this also supports the Startup Process of the operating system from the network. During the startup process, the terminal requires the server to assign an IP address, and then use TFTP (Trivial File Transfer Protocol) or mtftp (Multicast Trivial File Transfer Protocol) download a startup software package to the local memory and execute it. the startup Software Package completes the basic software settings of the terminal to guide the terminal operating system that is pre-installed on the server.
PXE can boot a variety of operating systems, such as Windows 95/98/2000/XP/2003/Vista/2008, and Linux.

Previously, I transformed my PE into a version that can be remotely started with PXE. However, there is no way to test it. The DHCP server for broadband routing cannot be completely shut down, and the computer NIC with no shell is not in good contact and cannot connect to the network.

How to modify PE to PXE version see http://bbs.wuyou.com/viewthread.php? Tid = 132605. My PE can be changed to PXE easily.

However, we still found a way to disable the broadband routing, install VMWare, use VMware's virtual Nic to connect to the host, and enable DHCP and TFTP servers on the host.

Before use, put the modified winpe. ISO, winnt. Sif, ntldr, and startrom. n12 (PXE Startup File) in the F: \ PXE directory.

DHCP and TFTP servers are in the Chinese version of hanewin DHCP server. However, it seems that the Chinese version is very poor and the configuration is complicated. After trying, we can only ask VMware to find the DHCP server and assign an IP address, but the TFTP cannot be connected, the server also shows that the transfer rate is 0, which means only DHCP servers are used.

I had to read the help provided by the hanewin DHCP server, but I still couldn't find the reason.

Start the Forum search without any worries. After learning about it, delete all the server configurations and try again, it was successful.

I personally think it may be the reason for localization. The configuration interface is often faulty. I am afraid the original English version is stable.

The key is to modify the settings under the option menu and the ifxxx below.

First, select the IP address of the NIC that provides the DHCP service in the connection item in the settings.

The DHCP service settings do not need to be modified.

Set the tftp root directory and remove the following running mode restrictions.

Select the configuration items in the options for configuration.

Set the IP range provided by the DHCP server.

Key: Set the boot file to the root directory of TFTP.

The ISO image is loaded successfully, and the PE is started successfully.