650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M02/6F/89/wKiom1WfNUrghPlyAAB2goxoO_Y886.jpg "style=" float: none; "title=" 1.jpg "alt=" Wkiom1wfnurghplyaab2goxoo_y886.jpg "/>
The GNS3 does not have a configurable layer two switch, so if you want to emulate a switch, you must use a router
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6F/86/wKioL1WfNx7AuxWnAAGLXc_9Jyg856.jpg "style=" float: none; "title=" 2.jpg "alt=" Wkiol1wfnx7auxwnaaglxc_9jyg856.jpg "/>
Add the NM-16ESW switch interface to the router, but be aware that you should use "manunal" to avoid connection errors when selecting a connection line
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M00/6F/89/wKiom1WfNU_B6-3gAAFzClXe6bc998.jpg "style=" float: none; "title=" 3.jpg "alt=" Wkiom1wfnu_b6-3gaafzclxe6bc998.jpg "/>
Of course, you can click on the router "right button-change flag" to change the icon for the switch, the second layer is changed to two-layer appearance. Three layers are changed to three layers. You don't have to change it.
650) this.width=650; "src=" http://s3.51cto.com/wyfs02/M01/6F/86/wKioL1WfNyHR281eAAASIajYGUc162.jpg "style=" float: none; "title=" 4.jpg "alt=" Wkiol1wfnyhr281eaaasiajyguc162.jpg "/>
This article is from the "It Hut in Santiago" blog, please be sure to keep this source http://wzjxzht.blog.51cto.com/4866070/1672809
Q: GNS3 analog switch