A wearable camera is a small and lightweight camera that can be used with a variety of accessories and can be worn on the body or fixed on other objects at will, it provides you with a distinctive shooting perspective and innovative shooting experience. This article describes how to pair a camera with a charging station.
I. Start the charging station
For the first time, you need to charge the charging seat and camera. If you have just purchased the camera, extract the film between the camera and the charging seat and embed the camera into the charging seat.
Press and hold the Menu key on the charging seat for more than 3 seconds, when the charging seat screen shows "TP-LINK" loose, waiting for the charging seat to complete the boot and enter the main interface, as shown below:
Note:: If the power of the charging station cannot be started, it may be that the power of the charging station is insufficient. Please use the USB interface of the USB data cable to connect to the charging station for a period of time and then try to start the system.
2. Matching the charging seat with the camera
The screen prompts "recognize camera" and prompts you to pair and connect a new camera. Click the shutter key on the right of the charging seat to select "OK", as shown in the following figure:
At this time, the screen prompts "pairing the camera". Wait for a while and "pairing successful" is displayed, as shown in the figure below:
III. Camera startup
After the camera is paired with the charging seat, you can use the charging seat to control the camera. Start the camera now.
Press and hold the Camera Power key on the left of the charging station for more than 3 seconds. When the Camera Power indicator is green, the Camera starts up successfully. The screen of the charging station shows "connection successful", as shown in the figure below:
Note:: After the pairing is successful, when the charging seat is not powered on or the Camera is not embedded in the charging seat, press and hold the Camera Power key for more than 3 seconds, the indicator light is a green flash, indicating that you are searching for the Camera, after several seconds, the light turns green, indicating that the camera is successfully connected to the charging seat.
Now, the camera is paired with the charging station, you can use the charging station to control the camera to take pictures and videos.
IV. Answer questions
1
What should I do if the camera cannot be paired with the charging station?
The newly purchased camera is separated by a thin film at the junction of the charging seat. When pairing for the first time, remove the film and embed the camera into the charging seat. In addition, you also need to confirm that the camera and the charging seat are fully powered, you can embed the camera into the charging seat, and then use the USB cable to connect the charging seat USB interface to charge for a period of time before trying to pair.
2
How to shut down the charging seat and camera?
Charging seat shutdown method: press the Menu key on the charging seat for more than 3 seconds, when the screen prompts is shutting down loose.
Camera shutdown method: press and hold the Camera Power key on the left side of the charging station for more than 3 seconds. When the Camera Power indicator is off, it is loose.
Note:: When the camera is shut down, the Bluetooth module is still on, so it will continue to consume power. When you use the camera again, first embed the camera into the charging seat for charging.
3
, Mobile phone
APP
Can the camera be controlled?
/
Shutdown?
No. You can only use the Camera Power key of the charging station to control the Camera's on/off.
4
How to charge the camera in the charging station?
When a camera is embedded in a charging station, the charging station can continue to charge the camera whether or not it is turned off. If you do not use a camera, we recommend that you shut down the camera and the charging seat and place them separately.
Note:: When the camera is turned on, the charging seat will not charge the camera.
5
How long can a charging station control the camera?
After the charging seat is paired with the camera, the camera does not have to be embedded in the charging seat. The charging station uses Bluetooth to control the camera. The valid distance is less than 5 meters. The distance between the camera and the charging seat does not affect the control camera of the mobile APP. You only need to keep the camera on.
