Quick FWR200 How to install the 300M wireless router

Fast FWR200 installation method for 300M wireless router

1, set the Administrator password: Open the browser on the computer, enter "192.168.1.1" in the browser's address bar, and you will see the login page shown in the following image, in the "Set Password" box, set the login password for the router in the "Confirm Password" box, and then click the "Confirm" button.

Note: Please keep in mind that you have just set the administrator password, you must enter the router after the password you have just set up to be able to log in; If you forget the set password, you can only pass the reset button on the FWR200 router, restore the router to the factory settings, and then reconfigure the router.

2, Login Management interface: Enter just set the administrator password--> click "OK".

3, Run the Setup wizard: the first time you log in, the router will automatically eject the Settings Wizard interface, if not pop-up, users can click on the left menu of the "Settings Wizard" option to enable.

4, choose the way to access the Internet: FWR200 routers support "PPPoE (ADSL virtual dial-up)", "Dynamic IP" and "Static IP" These 3 kinds of Internet access; The following details the settings for each type of Internet access.

PPPoE (ADSL virtual dialing)

PPPoE (ADSL virtual dial-up) is suitable for the following users: for broadband services, broadband operators provide a broadband user name and password to the user, in the absence of a router, you need to be on the computer through the "broadband connection" to dial the Internet.

Configuration method

(1), select "PPPoE (ADSL virtual dial)"--> click "Next"

(2), according to broadband operators to provide broadband username and broadband password, to fill in the interface of the "User name" and "Password"--> click "Next".

Static IP

Static IP is suitable for the following users: for broadband services, broadband operators provide an IP address, subnet mask, gateway, DNS server address information to the user.

Set method

(1), select "Static IP (Network service provider to provide fixed IP address)"--> click "Next".

(2), according to the broadband operators to provide IP address, subnet mask, gateway, DNS server information, fill out the dialog box--> click "Next".

Dynamic IP

Dynamic IP is suitable for the following users: for broadband services, broadband operators to provide a network cable to the user's home, in the absence of routers, the only need to plug the network cable in the computer can access the Internet, the computer's IP address configured for automatic access.

Set method

(1), select "Dynamic IP (automatically from the Network service provider to obtain IP address)"--> click "Next".

5, wireless network configuration: "Wireless function" selection: Enable--> Set "SSID", the SSID is the name of the wireless network, we recommend the combination of letters and numbers, do not use the Chinese--> select "Wpa-psk/wpa2-psk"--> Set "password"-- > click "Next". PS: Other options remain by default.

Note: The channel bandwidth settings mentioned above are only for network devices that support IEEE 802.11n protocols, and this setting does not take effect for devices that do not support IEEE 802.11n protocols.

6, in the pop-up page to confirm the parameters set, click "Finish" to save the configuration and effective, the end of the Setup wizard.