Cisco is the one who learns when it comes to networking. So the Cisco complex is very deep, and then the working contact with Cisco devices is few ...
about configuring the same port configuration in bulk
# # #思科:
Interface Range g1/0/x to g1/0/y # # # #就英文的意思, today a set of port ranges ...
Switchport mode access
Switchport Access VLAN 300
# # #华为, Hua 3 no? (Some people will tell you no, the manual will not be found) ....
In fact, China 3 is also some. But it's called:
Port-group X Group-member Interface g1/0/x to g1/0/y # # #比较旧的交换机可能要先定义组
Port Link-type Access
Port Access VLAN 300
-------------------------------
In fact, the port to join the same VLAN ID, China 3 has a more simple ... (The method above:
-
is to make up for why Cisco has, other manufacturers China 3 no ,similar things defect .... Not much meaning)
-
Install a must ..... )
There are more simple ways to add ports to VLANs in bulk ....
VLAN 300
Port g1/0/x to g1/0/y
Quit
# # # #是不是比cisco快多了, much faster than port-gropu ...
This article is from the "samly" blog, make sure to keep this source http://323248.blog.51cto.com/313248/1775875
"Dry" Cisco H3C Switches Bulk configuration ports those things