"Wireless liquid level transmitter application case" water level wireless remote control pump scheme for high reservoir

"Wireless liquid level transmitter application case" water level wireless remote control pump scheme for high reservoir　

　　　

One, introduction to the scheme

The scheme adopts 433MHz independent wireless communication mode, no running costs, real-time communication, and the use of public GSM network, through SMS to realize remote alarm.
Each reservoir is divided into 2 segments, representing 2 different water level heights, using the float state to indicate the current water level of the reservoir. The liquid level switch signal is introduced into the wireless water level transmitting device, if there is no power supply near the pool, it can be powered by the integrated solar power of the delta.
Yamashita Pump station control room wireless receiving device received from the mountain up and down the water level signal, through the control circuit output to open the pump signal or stop the pump signal. At the same time, SMS alarms to the duty station mobile phone to send notification text messages, real-time report current water level and pump work status.

　　

　　Second, the required equipment

Water level monitoring wireless transmitting equipment, water pump control room wireless receiving equipment.

Three, Case 1: Two reservoirs on the hill, two pumps under the hill

Located under the Qinling Mountains, the safari park has two reservoirs in the mountains, providing water for the entire park's animals. The No. 1th cistern is about 1000m from the central monitoring room, and the 2nd reservoir is about 2000 meters from the central monitoring room. The monitoring room is in the Yamashita working area and the pump and controller are installed. The solution is as follows:

According to the above conditions, the use of water level wireless transmission controller + SMS alarm scheme can be fully meet the requirements of party A, this program does not need to ditch the wiring, pool and pump room through the radio switch to achieve, the pool without power, using solar power supply, in the water pump station through the wireless receiver control pump start and stop, At the same time with the integrated SMS alarm to the duty personnel mobile phone to send water level alarm message.
The core controller of this scheme is the DTD110HY switch signal wireless transmitter. In the mountain Reservoir installed water level switch, with a DTD110HCW level switch monitoring terminal to achieve water level wireless transmission, because there is no power on the mountain, so the use of solar energy and battery power supply mode. In the mountain control room to install a dtd110hcry pump terminal, at the same time equipped with a dtp_re SMS alarm terminal, in the mountain water level alarm signal, you can send alarm messages to staff mobile phone.

Four, Case 2:4 pools on the hill, 6 pumps in the mountains

There are 4 pools on the hill, and pool 1th is the total pool, with self-flow to numbers 2nd, 3rd and 5th.
There are 6 water pumps under the mountain and 3 km from the 1th pool on the hill.
when the 1th water tank is full, the switching signal transmitter sends the stop-pump switch signal to the 6 water pump controller under the mountain, and closes the inlet valve of pool 1th; SMS alarm to send SMS notice to the duty personnel, can set up the SMS content, the duty personnel can set 8-bit.
When water shortage in pool 1th, the switch signal transmitter sends the pump switch signal to the Mountain 6 water pump controller, at the same time open the inlet valve of pool 1th; SMS Alarm to send a text message to notify on duty personnel, can set up SMS content, on duty personnel can set 8.  
when the 2~5 water tank is full, the valve controller closes the water inlet valve of the pond, the SMS alarm sends the SMS to inform the duty personnel, can set up the text message content beforehand, the duty person can set up 8 bits.
When the 2~5 pool is short of water, the valve controller opens the water inlet valve of the pool, the SMS alarm sends the SMS to inform the duty personnel, can set up the SMS content beforehand, the duty person can set up 8 bits.

　　V. Examples of applications

High water level, tap water and other remote switch control application unit:

? ☆ Baoji Chisun County town, solar powered high water tower automatic control wireless remote control pump, 3 km, 2014

? ☆ Jingmen Jing Xiang Water supply company, pool level wireless real-time display remote control system, 2.5 km, 2014

? ☆ Sichuan Lu County Temple Town Farm machinery service station, mountain pool water level wireless telemetry, 5 km, 2014

? ☆ Kunming Guandu, Solar powered mountain basin water level wireless telemetry alarm, 5 km, 2014

? ☆ Kai Red Light Water plant, water level wireless telemetry, 2013

? ☆ Qingyuan Yangshan County Town, Nanyang City, Guangdong Province, the water level telemetry, 2 km, 2013

? ☆ Henan Power Special Electromechanical Equipment Co., Ltd., in-Plant water level monitoring, 3 km, dtd110hcy,2013 year

? ☆ Lianyungang City Water Supply Co., Ltd, water level telemetry, 2 km, dtd110hcy,2011 year

? ☆ Lanzhou automation Equipment Company, mountain Reservoir water level remote control pump start stop, 2 km, dtd110hcy,2012 years

? ☆ Beijing Clean Technology Co., Ltd., water level control of the mountain Basin, 1 km, dtd110hby,2009 year

? ☆ Guiyang Automatic Control Technology Engineering Co., Ltd., river level monitoring, 1 km, dtd110hby,2008 year

VI, related information

? remote Monitoring and control scheme of water level in high reservoirs download document password Please scan QR code

? "Siandate provides" water level wireless control system for long distance

? "Siandate provides" Kingview and Siemens PLC wireless communication terminals and Solutions

Get the information password you can follow the subscription number DTD110HF:

Add scanning QR Code: Enter 1 First, then enter 2 to get the password.

"Wireless liquid level transmitter application case" water level wireless remote control pump scheme for high reservoir