"Reprint" Linux tips: Use screen to manage your remote sessions

Transferred from: https://www.ibm.com/developerworks/cn/linux/l-cn-screen/

Summarize

1. Start and enter a screen session: screen or screen-s name
   

   $ screen-s Copylocalfiletohdfsscreen

2. Leave the current session and can come back: control+a+d
   

   [Detached from 26886.copyLocalFileToHdfsScreen]

3. Back to a session: Screen-ls
   

   $ screen-lsthere are a screen on:    26886.copyLocalFileToHdfsScreen    (11/18/2015 10:18:41 PM)    ( Detached)1 Socket in/var/run/screen/s-hadoop.

Here is the original details:

Do you often need SSH or telent telnet to a Linux server? Do you often have headaches for long-running tasks such as system backups, FTP transfers, and so on. Usually we open a remote terminal window for each of these tasks because they take too long to execute. Must wait for it to finish, during this period can not shut down the window or disconnect, otherwise this task will be killed, all halfway.

Culprit: SIGHUP Signal

Let's see why shutting down the window/disconnecting will cause the running program to die.

In Linux/unix, there are several concepts:

• Process group: A collection of one or more processes, each with a unique process group ID, which is the ID of the process leader process.
• Session Duration: A collection of one or more process groups, with a unique session-period-first process (session leader). The ID of the session ID that is the lead process.
• The session period can have a separate control terminal (controlling terminal). The session first process connected to the control terminal is called the control process (controlling processes). The process that is currently interacting with the terminal is called the foreground process group. The remaining process groups are called background process groups.

According to POSIX.1 definition:

• Hang-up signal (SIGHUP) The default action is to terminate the program.
• When the terminal interface detects a disconnected network connection, the hang-up signal is sent to the control process (session-first process).
• If the session first process terminates, the signal is sent to the foreground process group for that session period.
• A process exit causes an orphan process group to occur if any of the orphaned process group processes are in the stop state, sending Sighup and sigcont signals to all processes in the process group.

Therefore, when the network is disconnected or the terminal window is closed, the control process receives a SIGHUP signal exit, which causes the other process to exit during the session.

Let's look at an example. Open the two SSH terminal window and run the top command in one of them.

[email protected] root]# Top

In another terminal window, find the process ID of top 5180 and its parent process ID is 5128, which is the login shell.

[Email protected] root]# ps-ef|grep toproot      5180  5128  0 01:03 pts/0    00:00:02  toproot 5857 3672  0 01:12 pts/2    00:00:00 grep top

Using the Pstree command, you can see this relationship more clearly:

[Email protected] root]# pstree-h 5180|grep top|-sshd-+-sshd---bash---top

Using the PS-XJ command, you can see that the login shell (PID 5128) and top are in the same session period, the shell is the session first process, the process group Pgid is the 5128,top process group Pgid is 5180, is the foreground process group.

[[email protected] root]# ps-xj|grep 5128 5126  5128  5128  5128 pts/0     5180 S        0   0:00-bash 5128  5180  5180  5128 pts/0     5180 S        0   0:50 top 3672 18095 18094 3672  pts/2    18094 S        0   0:00 grep 5128

Close the first SSH window, and in the other window you can see that top is also killed.

[[email protected] root]# ps-ef|grep 5128root     18699  3672  0 04:35 pts/2    00:00:00 grep 5128

If we can ignore the sighup signal, closing the window should not affect the operation of the program. The Nohup command can do this, and if the standard output/standard error of the program is the terminal, Nohup redirects it to the Nohup.out file by default. It is important to note that the Nohup command only causes the program to ignore the sighup signal, and it needs to use tags & put it in the background to run.

Nohup <command> [argument ...] &

Although Nohup is easy to use, it is still relatively "crude", for simple commands can be dealt with, for the complex needs of human-computer interaction task is troublesome.

In fact, we can use a more powerful utility screen. A popular Linux distribution, such as Red Hat Enterprise Linux 4, usually comes with the screen utility, and if not, it can be downloaded from the official website of the GNU screen.

[Email protected] ~]# rpm-qa|grep screenxscreensaver-4.18-5.rhel4.11screen-4.0.2-5

Start using screen

Simply put, screen is a window manager that can multiplex a physical terminal across multiple processes. Screen has the concept of session, users can create multiple screen windows in a screen session, in each of the screens window like the operation of a real telnet/ssh connection window. There are several ways to create a new window in screen:

1. Type the screen command directly at the command line

[Email protected] ~]# screen

Screens will create a full-screen window that executes the shell. You can execute any shell program, just like in the SSH window. Type exit in the window to exit the window, if this is the only window of the screen session, the screen session exits, otherwise screen automatically switches to the previous window.

2. Screen command followed by the program you are going to execute.

[Email protected] ~]# Screen VI test.c

Screen creates a single-window session that executes VI test.c, and exiting VI exits the window/session.

3. Both of these methods create a new screen session. We can also create a new window in an existing screen session. In the current screen window C-a c , type the CTRL key +a, and then press the C key, screen to generate a new window within the session and switch to that window.

Screen also has more advanced features. You can temporarily disconnect (detach) a screen session without interrupting the program running in the screens window, and reconnect (attach) The session at a later time to regain control of the programs running in each window. For example, we open a screen window to edit the/tmp/abc file:

[Email protected] ~]# screen VI/TMP/ABC

Then we want to quit for a while and do something else, like go for a walk, then type in the screen window C-a d , which will give you a detached hint:

Temporarily interrupt a session

Came back in half an hour and found the screen session:

[[email protected] ~]# Screen-lsthere is a screens on:        16582.pts-1.tivf06      (Detached) 1 Socket In/tmp/screens/s-ro Ot.

Reconnect session:

[Email protected] ~]# screen-r 16582

See what's going on, it's great, it's all there. Keep doing it.

You may notice that a special key combination c-a is used to send a command to screen. This is because the information we type on the keyboard is sent directly to the current screen window and must be issued in a different way to the screen window manager, which, by default, receives a command starting with C-a. This form of command is called key binding in screen, C-a is called command character.

You can C-a ? view all the key bindings by using the key bindings that are commonly used:

C-a?	Show all key binding information
C-a W	Show list of all windows
C-a c-a	Switch to the previously displayed window
C-a C	Create a new window to run the shell and switch to that window
C-a N	Switch to the next window
C-a P	Switch to the previous window (relative to C-a N)
C-a 0..9	Switch to Window 0: 9
C-a A	Send c-a to current window
C-a D	Temporarily disconnecting a screen session
C-a K	Kill the current window
C-a [	Enter copy/rollback mode

Screen common options

Using the key binding c-a? command, you can see that the default command character is C-a, and the character of the escaped c-a (literal ^a) is a:

Screen common options

Because screen sees C-a as the start of the screens command, enter c-a A If you want the c-a character to be received by the window. Screen also allows you to use the-e option to set your own command and escape characters in the following format:

-exy x is the command character, and y is the character that escapes the command character

The following command launches a screen session that specifies the command character C-t, the character of the escaped c-t is T, and the change is visible through the C-T command.

[Email protected] root]# SCREEN-E^TT

Custom command characters and escape characters

Other common command options are:

-C file	Using the profile file instead of using the default $HOME/.SCREENRC
-d|-d [Pid.tty.host]	Instead of opening a new screen session, you are disconnecting other running screen sessions
-H num	Specifies that the history rollback buffer size is num rows
-list|-ls	List existing screen sessions in pid.tty.host format
-d-m	Start a session that starts in disconnected mode
-R sessionowner/[Pid.tty.host]	Reconnect a disconnected session. Connect to other users in multi-user mode screen session needs to specify Sessionowner, requires Setuid-root permissions
-S SessionName	Assigning a name to a session when creating a screen session
-V	Show screen version information
-wipe [Match]	Same-list, but delete disconnected sessions

The following example shows that there are currently two screen sessions in the detached state, and you can use Screen-r <screen_pid> reconnect:

[Email protected] root]# Screen–lsthere is screens on:        8736.pts-1.tivf18       (Detached)        8462.pts-0.tivf18       (Detached) 2 Sockets in/root/.screen. [Email protected] root]# screen–r 8736

If for some reason one of the sessions dies (for example, by killing the session), Screen-list will show that the session is dead state. Use the Screen-wipe command to clear the session:

[Email protected] root]# kill-9 8462[[email protected] root]# Screen-ls  There is screens on:        8736.pts-1.tivf18       (Detached)        8462.pts-0.tivf18       (Dead???) Remove dead screens with ' screen-wipe '. 2 Sockets In/root/.screen. [Email protected] root]# Screen-wipethere is screens on:        8736.pts-1.tivf18       (Detached)        8462. Pts-0.tivf18       (removed) 1 socket wiped Out.1 socket in/root/.screen.[ [Email protected] root]# Screen-ls  There is a screens on:        8736.pts-1.tivf18       (Detached) 1 Socket In/root/.sc Reen. [Email protected] root]#

The-D–M option is an interesting pair of partners. They start a session that starts in disconnected mode. You can connect to the session when you need it later. Sometimes this is a useful feature, such as we can use it to debug background programs. A more common pairing of this option is:-dms sessionname

Start a screen session that is disconnected from the initial state:

[Email protected] tianq]# Screen-dms mygdb gdb execlp_test

To connect to the session:

[Email protected] tianq]# screen-r mygdb

Manage your remote sessions

Let's take a look at how to use screen to solve sighup problems, such as now we want FTP to transfer a large file. If you follow the old approach, SSH logs into the system, the direct FTP command begins to transfer, and then: If the network speed can also, congratulate you, do not have to wait too long, if the network is not good, honestly wait, can only transfer and then disconnect SSH connection. Let's use screen to try.

SSH login to the system and type screen at the command line.

[Email protected] root]# screen

Enter the FTP command in the Screen Shell window, log in, and start the transfer. Don't want to wait? OK, type c-a D in the window:

Manage your remote sessions

And then.. Exit SSH login? Whatever you want, just don't kill the screen session.

Isn't it convenient? Further, we can actually use screen to manage your remote session and save all your work. Do you have to open a lot of Windows every time you log on to the system, and then open the Windows repeatedly every day? Let screen to help you "save" it, you just need to open an SSH window, create the required screen window, exit c-a D "Save" your work, the next time you log in directly screen-r <screen_pid> will be OK.

It's best to give each window a name, so it's good to remember. Use C-a A to name the window. These window names can be seen using C-a W, where the names may appear differently. Using putty:

Putty

Using Telnet:

Telnet

More screen Features

Screen provides rich and powerful customization capabilities. You can specify more in the default level two profile of screen/ETC/SCREENRC and $HOME/.SCREENRC, such as setting screen options, customizing the binding key, setting the screens session self-launch window, enabling multiuser mode, customizing user access control, and more. You can also specify the screen configuration file yourself if you wish.

In the case of multi-user functions, screen is run in single-user mode by default, and you need to specify multiuser on in the configuration file to open multiuser mode via acl* (Acladd,acldel,aclchg ... ) command, you can flexibly configure other users to access your screen session. Please refer to Screen's man page for more information on the configuration file.

Resources

• "Advanced programming in the Unix®environment:second Edition" W. Richard Stevens, Stephen A. Rago provides more information on Linux/unix process relationships, Knowledge of the signal.
• Official website of the GNU screen: http://www.gnu.org/software/screen/
• Screen's man page provides the most detailed information: http://www.slac.stanford.edu/comp/unix/package/epics/extensions/iocConsole/screen.1.html

"Reprint" Linux tips: Use screen to manage your remote sessions