Rac_grid self-check prompts that the cvuqdisk package is missing, and rac_gridcvuqdisk

Rac_grid self-check prompts that the cvuqdisk package is missing, and rac_gridcvuqdisk

Original Works are from the blog of "Deep Blue blog". You are welcome to reprint them. Please note the following source when reprinting them. Otherwise, you will be held legally liable for copyright.

Deep Blue blog: http://blog.csdn.net/huangyanlong/article/details/40779137

 

Environment: CentOS 6.4 64bit, grid 64bit

 

Error Description: an error is reported during grid self-check. The cvuqdisk package is missing.

 

Solution: Install the cvuqdisk package

 

Procedure:

To solve the problem of missing cvuqdisk packages, go to the grid software path (this installation package can be found in the rpm path) and find the cvuqdisk package. Complete the installation as follows.

Node 1:

[Root @ test 1 rpm] # rpm-ivh cvuqdisk-1.0.9-1.rpm

Preparing... ######################################## ### [100%]

Using default group oinstall to install package

1: cvuqdisk ####################################### #### [100%]

 

Node 2:

[Root @ test2 soft] # rpm-ivh cvuqdisk-1.0.9-1.rpm

Preparing... ######################################## ### [100%]

Using default group oinstall to install package

1: cvuqdisk ####################################### #### [100%]

 

Run grid self-check again and pass the check.

Original Works are from the blog of "Deep Blue blog". You are welcome to reprint them. Please note the following source when reprinting them. Otherwise, you will be held legally liable for copyright.

Deep Blue blog: http://blog.csdn.net/huangyanlong/article/details/40779137