Radio/TV Broadband Router cracking

The following article describes how to use vrouters for Radio and Television Broadband. Most of my friends may use broadband for radio and television in their homes or in their stores. As we all know, Radio and Television Broadband prices are cheap, and the annual subscription is not limited, but if there are two or more simultaneous Internet access in the House, it is not very convenient. Just like I called radio and television today and said that I had two computers in the House to access the Internet, and the other party actually asked me to activate two ports of broadband. It is better for me to install a more expensive Telecom broadband. This is also a common problem. The Home radio/TV broadband is not easy to use with routers to enable simultaneous Internet access on multiple computers.

Before that, I also introduced how to crack the broadband routing methods of radio and television and China Telecom. However, a few of my friends did not solve this problem completely. Although China Telecom does not seal the routing port now, radio and television still seals the routing port as before. This morning, I called the DNS (192.168.11.8 Taizhou area) of the radio/TV consultation system. Grandma told me that there was no port closed because of the poor attitude of the other party. No port is closed. Using a router is not that laborious. We recommend two methods to crack radio/TV broadband restrictions on Internet access.

A: This is A method that I often say to my friends. Taking FAST Routing as an example, shoushou space station provides genuine FAST routers. If you need them, you can consult and purchase them)

1: First open IE and enter 192.168.1.1 in it with the username and password adminadmin) to go to the FAST Setting interface, and select the PPPOE connection method in the WAN port settings, enter your broadband user name and password in the user name and password, select your connection method, and save it.

2: Check the activity of the WAN port)

You can see that two DNS servers are provided behind the DNS server. To crack these two DNS servers, you must take note of these two DNS values first, based on your own Broadband Router, two DNS systems can be understood as one with broadband and the other with vro)

3: Open the properties of the local connection in the TCP/IP protocol), set a fixed IP address 192.168.1. ** the value ranges from 2 to 199, and then fill in one of the two DNS values just noted down)

4: Set the IP address on several other computers in sequence, use another DNS, and restart the router. All computers can access the Internet.

B: First, enter the vro setting interface. In the address bar of the IE browser, enter the 192.168.1.1 user name and password, which is generally admin.
1. Click the WAN port settings column and select the dynamic IP address;
2. Add the DNS lookup Method for broadcasting and television: Enter cmd in "start"-"run", click OK or press enter, and enter ipconfig/all and press Enter, the two lines of numbers behind DNSServers are, so that you don't have to call the radio/TV station to ask what your DNS is)
3. Find the Mac address clone, click "clone", and restart the computer. In this method, you no longer need to enter the user name and password for the broadband connection)

Based on the above two methods, the method B is the best. In this way, you can use a vro even if your routing port is blocked. The above are all methods of cracking.