Radio/TV Video broadband for wireless route settings

I bought a new notebook and a desktop in my home. To achieve wireless Internet access, I bought a wireless router. Wireless Internet access has been achieved in the company, but it is never possible at home, and it is found that the router cannot connect to the Internet.

After calling the video broadband customer service, the answer is that there is no limit on the number of users accessing the internet, but no technical support is provided.

The reason for querying the Internet is to find a possibility: it is estimated that the modem of the video will bind the IP address to the MAC address of the connected computer or route after each power-on, and the IP address can be removed only after the power is down, if the IP address of the computer a you connect to on the modem can be obtained, it cannot be used if you connect to computer B. You have to dial the power before inserting it.

In the router settings, select "use computer MAC address" for the MAC address of the vro, and save the settings immediately.

The following are the materials for transferring to the Internet:

Solution for Guangdong Cable Broadband Router connection failure

Yesterday, I received a call from a customer saying that the computer could not be connected to the Internet. I said that we had a door-to-door card for our company and asked the customer about the basic situation, the general information obtained is that Guangdong cable's video broadband is used to connect directly to the computer. Four of the lights are on, that is, the webpage cannot be opened, which may be due to setup problems, with the NIC network cable and some related tools, it seems that the customer has told him that broadband is a good video, the four lights are bright and the red lights at the bottom are all bright. motorala's modem is connected to the SMC's full English dual-antenna route. It should be normal from the light, although there is no such thing as telecom or long width, broadband route installation of Guangdong cable video still has some experience. Video broadband is the one that automatically allocates IP addresses online and does not require dialing, I tried it on my computer and couldn't get on the network. I looked at the IP address of the network card and showed the private address. No wonder I couldn't help it. It seems that the problem is not as simple as it is, sit down and think about how to connect the modem to the computer first.
If you can obtain the IP address, you can also try to check whether the system Nic and driver are correct, or if there is no problem in the external line. Just do it, connect the modem and the computer directly, and restart the computer, I read nothing like exclamation marks and forks in the lower right corner of the desktop. I directly open IE and enter the web site to open the web page. It seems that it is not as complicated as I just thought, the problem lies in the routing. The routing looks a little old. It is an SMC dual-antenna tin case. There is no IP address or user name or password for the next tag, and the customer has no instructions or anything, there is only one such thing, and there is no way to press the reset key above to restore the factory settings. After the recovery, connect the computer and the computer can actually get the IP address, but it cannot access the network. As for this, based on experience, you only need to call the modem and then plug it in. Otherwise, you will not be able to get the video allocation in the route.
.

By the way, the method for setting the route for video bandwidth is as follows: Generally, the outbound Wan of the route is a dynamic IP address. You can directly use the bandwidth plug-in such as video without any configuration, some people on the Internet say they want to clone the MAC address to the router. According to the analysis, this is acceptable, but I think it is too troublesome. Simply put, connect the modem and the route line first, it is very important to power in again. It is estimated that the modem of video will bind the IP address to the MAC address of the connected computer or route after each power-on, and the IP address can only be removed after the power is down, if the IP address of the computer a you connect to on the modem can be obtained, it cannot be used if you connect to computer B. You have to call the computer before inserting it, I don't know if you can understand what I'm talking about, but you can try it if you have a chance.

For reference.