Raspberry Pi 3b+ Installation system

Installation Summary steps: Official website Download system-"brush into TF card-" Set on display and ssh-"Power on-" Enter the system

1. Go to the official website to download the system image

Download page: https://www.raspberrypi.org/downloads/

Come to the following page

Installation under 2.Windows System: (Non-wind system please look down) 2.1) First connect the Ready TF card to the card reader, insert the computer 2.2) download a format SD card tool, format SD card

Download URL: https://www.sdcard.org/downloads/formatter_4/eula_windows/(click aceept to start the download)

2.3) Download Win32 Diskimager, which is a tool for writing images to SD card

Download URL: http://sourceforge.net/projects/win32diskimager/

This step first select your raspberry.img system image package, then select your TF card, click on Write will start to work, about 3-4 minutes or so.

3. Now pre-set the TF card data 3.1) Open SSH Remote: (since September 2016, raspberry by default, SSH connection is closed)

Create an empty file named "ssh" in the TF card partition (do not have a txt suffix!). ）

3.2) Turn on the forced HDMI output: (Many of the current monitors are not recognized on the Raspberry Pi)

In the TF card partition, open the Config.txt file (post-boot location:/boot/config.txt), modify the following:

config_hdmi_boost=4 #开启热插拔

Hdmi_mode=#分辨率为适应屏幕分辨率的选择

hdmi_group=2 # 1:CEA TV monitor 2:DMT computer monitor

disable_overscan= #can remove the black border around the boot screen

Dtparam=audio=on

3.3) Set up a wireless Wi-Fi Connection

In the boot partition of the TF card, create the wpa_supplicant.conf file and add the following content:

Country=cn
Ctrl_interface=dir=/var/run/wpa_supplicant Group=netdev
Update_config=1

network={
Ssid= "Wifiname"
psk= "Wifipassword"
Priority=1
}

3.3) plug in the monitor, keyboard, mouse, power on

After the basic setup is complete, we insert the TF card into the Raspberry Pi and power on.

Raspberry Pi 3b+ Installation system