Re-install Windows system

Not much to say, this tutorial will take you to conquer Windows System "Of course is installed, including but not limited to Windows7, 8, 9, 10, J, Q, k..."

More pictures, cautious into!!!
More pictures, cautious into!!!
More pictures, cautious into!!!

1. Preparation

1. See if the motherboard supports UEFI

2. See if the disk is MBR or GPT

3. If you want to install Win7, you must be ready to drive the wizard Universal NIC version, WIN10 can omit this step
   "Because, Win7 does not bring its own driver. No drive on the net, no network computer loses its meaning. And the Driver Wizard Universal Network Card version can make your computer after reloading Win7 can connect the Internet, even after the Internet can download other drivers.

4. Genuine users please prepare your code, student users to say below.

5. Prepare the image file for Windows

6. If your computer has not been able to drive, and is not sure that the motherboard support UEFI, please use someone else's computer to download a PE tool, I prefer to use the old Peaches

7. A USB flash drive that can be formatted

8. Don't panic, the above preparation work, for a computer is not all necessary, see how you are. Let's take a look at the following example.

2. Installation examples

The author took two computers that do not normally boot to do this tutorial, in two computers

Can I Support

the original system	the system to be installed	format all the disks	does not support UEFI	the original hard drive format
Windows 7	Windows 7	can only format C drive	Not supported	Mbr
Windows 7	Windows 10	All the disks can be formatted	Support	Mbr

Here the author simply said the above parameters "are generally gpt+uefi or Mbr+bios mode, the other does not discuss"

• The original system
  
  • Because it is not normal to boot, so this parameter can not see
  • However, if you can boot normally, you can use the method of hard disk installation to install the system, more convenient "in the following example will be mentioned in the"

• System to be installed: If you want to install Windows 10, the normal installation method can only be mounted on a GPT-formatted disk, but there is a way to mount the MBR-formatted disk "reference instance one"

• Can I format all the disks

  • Yes: Well, if you want a traditional BIOS boot, select the MBR format disk. If it is a GPT-formatted disk, you can clean and convert mbr"reference instance one". If the disk is in MBR format, the format will not be used. If you want UEFI to boot, select the GPT format disk "Reference instance two", "How to go to disk format, the following will say"
  • No: See what system to install and what type of disk, Win 7 casually installed "reference instance one". But Windows 10, the original disk format is MBR can be "reference instance one", the original disk format is GPT and with UEFI "reference Instance II"

• Support does not support UEFI

  • Support: UEFI-enabled installation of Windows systems is best installed on a GPT-formatted disk. Faster Start-up
  • Not supported: UEFI is the traditional BIOS boot that is used, and Windows systems can be installed. Not really. You can use the stunt "reference instance One"

To start!!!
To start!!!
To start!!!

2.1 Legacy BIOS+MBR, only format C-disk installation Windows 7

2. Neither computer can boot properly.
   

4. Dell boot screen, the lower right corner of the prompt F2 into the BIOS settings, F12 boot settings
   

6. Press F12, did not see the Uefi typeface, so half of the heart is determined not UEFI boot mode, but do not know support, so selected enter setup, entered the BIOS Setup center. Look, this computer does not support uefi"simply to see if there is a uefi typeface is enough"
   

8. does not support UEFI, the computer can not boot, so only rely on the PE tool-old peaches:
   If UEFI is supported, the image can be extracted and copied to a USB flash drive in the Fat32 format so that the USB flash drive can go directly to the installer without any preparation
   If the computer can be turned on, you can directly install the hard disk "Simply speaking, is to extract the image, double-click setup.exe", but so the image is best not to extract to the C-drive, because you will be installed in the format of the C drive. "

10. The production of PE requires a normal use of the computer, the following production process on the other computer completed
    Below we start the old Peaches, Baidu search the keyword "old Peaches", and then click on the normal download in the picture is good
    

12. After the end of the run this tool, after running plug the USB stick, under the tool to select a USB flash drive, and then click the "one button to make a USB boot Disk" button.
    Note that the drive letter is correct, and note that the information on the USB drive is saved. Because this operation will format the USB flash drive.

14. When you click on it, a warning pops up and you can click OK after noticing the above note.
    And then just wait and wait. It will play a box and ask if you want to simulate the boot. It is not necessary for a person to be so smart as us, to cancel it.
    At this time our PE system has been made to complete.
    The PE system is equivalent to a temporary operating system that allows the computer to temporarily run the system to operate on the original C-disk.

16. Do not worry, we also need a Windows 7 mirror, if the computer does not have this image, then use another computer next image, copy to your USB drive. "No image How to install the system, can not 01010101 of the knock for a few hours."

18. Back to the computer we can not drive to restart the computer, press F12, select the second "USB Storage device", this will start from the USB device, which is our USB flash drive. So entered the PE system, select the first "run the Old Peaches Win8pex86 Lite version"
    
    

20. Wait a moment and then enter a system that looks like Windows 7/8, and we only need to do two things when we come in:

    • Format the original system disk C disk
    • Unzip the prepared Windows 7 image and copy to the C drive
      
      After these two steps, the C drive should look like this (double-click Setup.exe can also be installed)

22. Then reboot and reboot, then go to install Windows 7 step.
    
    
    

24. Because the system has already been copied into the C drive in the PE, so choose the C drive here next step is good
    
    

26. This will restart once the installation update is finished. To select the operating system you want to start when rebooting, here we choose Windows 7 instead of Windows Setup
    

28. Install the last item ...
    

30. It will restart once the installation is finished, select the operating system or choose Windows 7
    

32. The installation was completed after the reboot, followed by some settings
    Enter the user name, computer name, and password for the account (these three boxes can be used without filling, if you do not have a password, you can go directly to the next step)-Enter the Windows Product key (genuine user key, students can skip first)-Use recommended settings- Set the time and date and then enter the interface.

34. Next we need to deal with the finishing touches:

    1. To the C drive to delete the system image. EFI sources support upgrade Autorun Bootmgr.efi Setup
       
    2. Press Windows + R, enter Msconfig carriage return
       
       You can enter the system configuration, select the "Boot" tab, select Windows Setup Click Delete below, and then OK. Then restart, you will find that you do not need to choose which system to enter, become extremely normal.
       

36. At this point, the system has been installed. If you want to activate, please Baidu Windows loader.

38. Run the Driver Wizard Universal Network Card version, first installed network card driver, and then installed other drivers
    

Re-install Windows system