Re-release routing configuration code

 

Router> en

Router # conf

Starting ing from terminal, memory, or network [terminal]?

Enter configuration commands, one per line. End with CNTL/Z.

Router (config) # host R4

R4 (config) # int lo4

% LINK-5-CHANGED: Interface Loopback4, changed state to up

% LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback4, changed state to up

R4 (config-if) # ip add 192.168.4.1 255.255.255.0

R4 (config-if) # no shut

R4 (config-if) # exit

R4 (config) # int s0/1/0

R4 (config-if) # ip add 192.168.45.4 255.255.255.0

R4 (config-if) # clock rate 56000

R4 (config-if) # no shut

% LINK-5-CHANGED: Interface Serial0/1/0, changed state to down

R4 (config-if) # exit

R4 (config) # router rip

R4 (config-router) # net 192.168.4.0

R4 (config-router) # net 192.168.45.0

R4 (config-router) # end

% SYS-5-CONFIG_ I: Configured from console by the console

R4 #

 

 

 

Router> en

Router # conf

Starting ing from terminal, memory, or network [terminal]?

Enter configuration commands, one per line. End with CNTL/Z.

Router (config) # host R5

R5 (config) # int s0/1/1

R5 (config-if) # ip add 192.168.45.5 255.255.255.0

R5 (config-if) # no shut

R5 (config-if )#

% LINK-5-CHANGED: Interface Serial0/1/1, changed state to up

% LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1, changed state to up

R5 (config-if) # exit

R5 (config) # int s0/1/0

R5 (config-if) # ip add 192.168.56.5 255.255.255.0

R5 (config-if) # clock rate 56000

R5 (config-if) # no shut

% LINK-5-CHANGED: Interface Serial0/1/0, changed state to down

R5 (config-if) # exit

R5 (config) # router rip

R5 (config-router) # net 192.168.45.0

R5 (config-router) # redistribute VPN 4567 metric 10

R5 (config-router) # exit

R5 (config) # router VPN 4567

R5 (config-router) # net 192.168.56.0

R5 (config-router) # redistribute rip metric 1544 20000 255 1 1500

R5 (config-router) # end

% SYS-5-CONFIG_ I: Configured from console by the console

R5 #

 

 

Router> en

Router # conf

Starting ing from terminal, memory, or network [terminal]?

Enter configuration commands, one per line. End with CNTL/Z.

Router (config) # host R6

R6 (config) # int s0/1/1

R6 (config-if) # ip add 192.168.56.6 255.255.255.0

R6 (config-if) # no shut

% LINK-5-CHANGED: Interface Serial0/1/1, changed state to up

R6 (config-if )#

% LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1, changed state to up

R6 (config-if) # exit

R6 (config) # int s0/1/0

R6 (config-if) # ip add 192.168.67.6 255.255.255.0

R6 (config-if) # clock rate 56000

R6 (config-if) # no shut

% LINK-5-CHANGED: Interface Serial0/1/0, changed state to down

R6 (config-if) # router VPN 4567

R6 (config-router) # net 192.168.56.0

R6 (config-router )#

% DUAL-5-NBRCHANGE: IP-EIGRP 4567: Neighbor 192.168.56.5 (Serial0/1/1) is up: new adjacency

R6 (config-router) # redistribute ospf 4567 metric 1544 20000 255 1 1500

R6 (config-router) # exit

R6 (config) # router ospf 4567

R6 (config-router) # net 192.168.67.0 0.0.0.255 area 0

R6 (config-router) # redistribute Kerberos 4567 subnets

R6 (config-router) # end

% SYS-5-CONFIG_ I: Configured from console by the console

R6 #

 

 

Router> en

Router # conf

Starting ing from terminal, memory, or network [terminal]?

Enter configuration commands, one per line. End with CNTL/Z.

Router (config) # host R7

R7 (config) # int lo7

% LINK-5-CHANGED: Interface Loopback7, changed state to up

% LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback7, changed state to up

R7 (config-if) # ip add 192.168.7.1 255.255.255.0

R7 (config-if) # no shut

R7 (config-if) # exit

R7 (config) # int s0/1/1

R7 (config-if) # ip add 192.168.67.7 255.255.255.0

R7 (config-if) # no shut

% LINK-5-CHANGED: Interface Serial0/1/1, changed state to up

R7 (config-if )#

% LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/1, changed state to up

R7 (config-if) # exit

R7 (config) # router ospf 4567

R7 (config-router) # net 192.168.7.0 0.0.255 area 0

R7 (config-router) # net 192.168.67.0 0.0.0.255 area 0

R7 (config-router) # end

% SYS-5-CONFIG_ I: Configured from console by the console

R7 #

00: 02: 39: % OSPF-5-ADJCHG: Process 4567, Nbr 192.168.67.6 on Serial0/1/1 from LOADING to FULL, Loading Done