Red Meter Note cannot install software to SD card how to do red meter note cannot install software to memory card solution

Source: Internet
Author: User

One, SD card partition:

1-First installs the following Partition tool on the computer, WinXP the environment to run normally, but in Win7 operation must choose the XP SP2 (3) after the compatibility to be able to run normally.

Partition Tools Download:

2-After installation, the SD card is loaded into the computer USB port (can not use the data cable), back up the contents of the SD card, and then began to partition, and partition hard disk is a truth, we want to divide into two areas, the first area is FAT32, used to store photos and other personal data. The second area is EXT3, which is used to store the APP2SD program files.

Delete Partition: Plug the card into the computer, and then open the software. Choose to format the letter, I this card is 16GB. Then click "Delete" to delete the original partition. Delete the original partition, the first name entered "NO name" (can be both uppercase and lowercase) and the above can be consistent.

3-Create the FAT32 partition: I just deleted the old partition, now start to create a new partition, or select a good letter, click "Create." You can drag the letter as shown in the following illustration:

After the "New size", enter the capacity you want in the FAT32 format. Store photo song is this section, the equivalent of your phone's original memory card part. Small series of SD card is 16GB, so FAT32 divided into 8G image of the red part is to format the FAT32 partition created, the remaining blue part is the following to create the EXT3 partition space.

Note: volume name, arbitrarily take one, can be "*" but format must choose the FAT32 format, determine to proceed to the next step.

4-Create EXT3 partitions: Because I chose the size of the FAT32 partition, then the remaining blue part, directly select "Create" new partition on the line, no need to set the size of the partition, because the SD card only divided into two partitions, a FAT32 and a EXT3, it is recommended not to leave free space.

Then, like we just created FAT32, we create a EXT3 partition.

Note: volume name, arbitrarily take one, can be "*" but format must choose the EXT3 format, determine to proceed to the next step.

The EXT3 format is for the Android system, which means installing the software for the Red meter note. Just press "yes" to go to the next step.

All of the above, including two partitions are created and click "Apply", this last step is important, do not perform "application" just all the operations will not take effect.

Click "Yes" to enter the final stage of execution

To this end, all operations have been completed, the static and other zoning software completed ...

After the partition software completes, the SD card partition work completes ...

Note: After the SD card partition completes, dials directly out the computer side to be OK, does not need to carry on "The Safe Eject USB device"
Note: If you feel bad in the partition, regret, want to restore the SD card, just the first two steps, delete your memory card all the old partitions, in the creation of new partitions to the full capacity of FAT32 can, and finally remember point "application"!
Second, mobile phone installation LINK2SD

LINK2SD A can make Android more than 1.6 system users to move applications to the SD card, need root support, in fact, is LINK2SD Mount ext2 for/data/sdext2 your SD card partition, so that the Android system on the boot when it mounted, Implement Mobile program features!

After installing the LINK2SD software, enter the software, select Ext4 Software, automatic restart of the phone, you can transfer to the SD card software, create a connection to the SD card, as shown in Figure 3, you can see the storage of SD card.

warm tip: do not boot in the state of the memory card, or unplug the memory card after the boot, or will not be loaded with EXT2 partition, all connected to the memory card program will fail.

Okay, here is a detailed introduction of the red Meter note can not install software to memory card solution, I hope this solution can help everyone oh.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.