1. Enable the shell method after Red Rice Note2
1. The method for opening the red mi Note2 back cover is very simple. You only need to find a gap and then open it with your nails or dial along the gap. You can open a gap from the Micro USB interface at the bottom, and then follow the gap to open it slowly, as shown in the figure.
2. Note that after opening a small slit on the back cover of red rice Note2, you can slowly open the shell with your fingers or thin dial. Do not use brute force to damage the rear shell, as shown in the figure.
2. Red Mi Note2 SIM card installation tutorial
How can I insert a red rice Note2 card? As long as you know the following three points
1. Red Mi Note2 adopts a detachable back cover design. The SIM card slot is located inside the back cover. You need to open the back cover before card installation;
2. Red Mi Note2's built-in dual SIM card type is Micro-SIM card, that is, small card. If you have a standard SIM card (large card) in your hand, you need to cut the card or go to the business office to replace the small card, in addition, if you have a Nao SIM card (Mini Card) in your hand, you cannot cut the card, you can only go to the business office to change the small card.
3. Red Mi Note2 is divided into mobile 4G Edition and mobile/Unicom dual 4G Edition. SIM card slot 1 and SIM card slot 2 are independent of the primary and secondary cards and can be installed at will, you only need to set or switch the primary and secondary cards in red rice Note2 settings.
Steps for installing SIM card in red mi Note2:
Step 1: first prepare a small card. You can install dual-card or only one SIM card;
Step 2: First shut down, then open the red rice Note2 back cover, the rear shell uses a snap design, you can start from the data interface at the bottom
Step 3: load the prepared Micro-SIM mobile phone card into the card slot 1 or card slot 2, install the back cover, start the system, and then enter the settings to set the network.