RedHat 7 Configuration Bonding dual NIC Binding

Source: Internet
Author: User

Redhat 7 Although the new teaming technology supports dual-NIC bindings, bonding technology can still be used, but slightly different from the configuration of Redhat 6.

Configuring bond bindings for load Balancing mode

Create and edit the bond0 configuration file:vi ifcfg-bond0, and fill in the following: where mode=6 represents a different load-balancing mode for MAC addresses

Bootproto=static

Device=bond0

Name=bond0

Type=bond

Bonding_master=yes

Onboot=yes

ipaddr=192.168.10.5

Prefix=24

gateway=

dns=

Bonding_opts= "Miimon=100mode=6"


650) this.width=650; "title=" 01.png "style=" Float:none; "alt=" wkiom1djk7haasecaaanamblucs449.png "src=" http:/ S3.51cto.com/wyfs02/m00/82/e0/wkiom1djk7haasecaaanamblucs449.png "/>

Edit the Subordinate interface profile:vi ifcfg-eno16777736, and fill in the following:

Type=ethernet

Bootproto=none

device=eno16777736

name=eno16777736

Bonding_master=yes

Onboot=yes

Master=bond0

Slave=yes

650) this.width=650; "title=" 02.png "style=" Float:none; "alt=" wkiom1djk7kgy8y7aaah9epwxvc665.png "src=" http:/ S4.51cto.com/wyfs02/m00/82/e0/wkiom1djk7kgy8y7aaah9epwxvc665.png "/>

To edit the second subordinate interface configuration file: vi ifcfg-eno33554960 , and fill in the following content:

Type=ethernet

Bootproto=none

device=eno33554960

name=eno33554960

Bonding_master=yes

Onboot=yes

Master=bond0

Slave=yes

650) this.width=650; "title=" 03.png "style=" Float:none; "alt=" wkiol1djlmism5faaaajnw9gmhu529.png "src=" http:/ S4.51cto.com/wyfs02/m00/82/df/wkiol1djlmism5faaaajnw9gmhu529.png "/>

Restart the network service for BOND0 to take effect

650) this.width=650; "title=" 04.png "style=" Float:none; "alt=" wkiom1djk7kjdu7eaaaekes4kt0941.png "src=" http:/ S4.51cto.com/wyfs02/m01/82/e1/wkiom1djk7kjdu7eaaaekes4kt0941.png "/>

Check the status of the network card:IP Add, the red box can be seen configured to take effect, 4 cards in the first two network cards have been effective as bond0 slave interface, and the MAC address is not the same, so the switch port does not need to do any configuration

650) this.width=650; "Width=" 915 "height=" 336 "title=" 05.png "style=" Width:733px;height:287px;float:none; "alt=" Wkiol1djlmmifcjdaabw_tud87w922.png "src=" Http://s4.51cto.com/wyfs02/M01/82/DF/wKioL1djlMmifCJdAABW_TUD87w922.png "/>

To view the status of Bond0:cat/proc/net/bonding/bond0, you can see that the status of Bond0 is normal

650) this.width=650; "title=" 06.png "style=" Float:none; "alt=" wkiol1djlmnr9s1taaa6sr_v5fm388.png "src=" http:/ S3.51cto.com/wyfs02/m00/82/df/wkiol1djlmnr9s1taaa6sr_v5fm388.png "/>

Test , first long ping, then Disconnect one of the network card connection, no packet loss occurred

650) this.width=650; "Width=" 971 "height=" 338 "title=" 07.png "style=" Width:732px;height:244px;float:none; "alt=" Wkiom1djk7ojlwi1aabasxruory730.png "src=" Http://s3.51cto.com/wyfs02/M02/82/E1/wKiom1djk7Ojlwi1AABasXrUOrY730.png "/>

650) this.width=650; "title=" 08.png "style=" Float:none; "alt=" wkiom1djk7oy3yx1aaapshggg00198.png "src=" http:/ S3.51cto.com/wyfs02/m01/82/e1/wkiom1djk7oy3yx1aaapshggg00198.png "/>

also see that the current active slave NIC automatically switches to eno33554960

650) this.width=650; "title=" 09.png "style=" Float:none; "alt=" wkiol1djlmqqkucdaaa5bbtrrtm317.png "src=" http:/ S3.51cto.com/wyfs02/m02/82/e0/wkiol1djlmqqkucdaaa5bbtrrtm317.png "/>

Configuring Bond bindings for the main standby mode

Similarly, create a binding for the main standby mode for the remaining two NICs bond1,mode=1 is the primary standby mode

650) this.width=650; "title=" 10.png "style=" Float:none; "alt=" wkiol1djlmqh8w5gaab6fvjpwdg887.png "src=" http:/ S1.51cto.com/wyfs02/m01/82/e0/wkiol1djlmqh8w5gaab6fvjpwdg887.png "/>

650) this.width=650; "title=" 11.png "style=" Float:none; "alt=" wkiom1djk7ww3p72aaa4zjyssz8138.png "src=" http:/ S4.51cto.com/wyfs02/m00/82/e1/wkiom1djk7ww3p72aaa4zjyssz8138.png "/>

test: First length Ping , and then disconnect one of the network cards, no drop packets occur

650) this.width=650; "Width=" 943 "height=" 447 "title=" 12.png "style=" Width:690px;height:323px;float:none; "alt=" Wkiol1djlmzbh83eaab1jrokluc446.png "src=" Http://s4.51cto.com/wyfs02/M00/82/E0/wKioL1djlMzBH83EAAB1jROKlUc446.png "/>

650) this.width=650; "title=" 14.png "style=" Float:none; "alt=" wkiol1djlmzhrp7uaaaiovq59xa647.png "src=" http:/ S4.51cto.com/wyfs02/m01/82/e0/wkiol1djlmzhrp7uaaaiovq59xa647.png "/>

both sets of bindings can simultaneously Ping Pass

650) this.width=650; "title=" 15.png "style=" Float:none; "alt=" wkiom1djk7fdqtnhaabrbhkoozg522.png "src=" http:/ S4.51cto.com/wyfs02/m02/82/e1/wkiom1djk7fdqtnhaabrbhkoozg522.png "/>


This article is from the "Jiangjianrong Technology blog" blog, make sure to keep this source http://jiangjianlong.blog.51cto.com/3735273/1790294

RedHat 7 Configuration Bonding dual NIC Binding

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.