REDHAT7 Building iSCSI Target

REDHAT7 Building iSCSI Target

Dividing new partitions (steps)

# FDISK/DEV/SDC

# partprobe (update partition table)

Create a volume group first

# PVCREATE/DEV/SDC1

# vgcreate VGMING/DEV/SDC1

# lvcreate-l 2g-n/dev/vgming/lvming

# Lvscan

ISCSI Target

# yum Install Targetcli

# TARGETCLI

> Backstores/block create/dev/vgming/lvming

> CD iSCSI

/iscsi> Create Iqn.2016-03.com.ming:aa

> ls

> CD IQN.2016-03.COM.MING:AA/TPG1

/iscsi/iqn.2016-03.com.ming:aa/tpg1> ls

/iscsi/iqn.2016-03.com.ming:aa/tpg1> CD ACLs

/iscsi/iqn.2016-03.com.ming:aa/tpg1/acls> Create Iqn.2016-03.com.ming:aa

/iscsi/iqn.2016-03.com.ming:aa/tpg1/acls> CD. /luns/

/iscsi/iqn.2016-03.com.ming:aa/tpg1/luns> Create/backstores/block/disk1

/iscsi/iqn.2016-03.com.ming:aa/tpg1/luns> CD. /portals

/iscsi/iqn.2016-03.com.ming:aa/tpg1/portals> Create 10.0.0.2 (native IP)

/iscsi/iqn.2016-03.com.ming:aa/tpg1/portals> exit

# Systemctl Start target

# Systemctl Enable target

# Firewall-cmd--permanent--add-port=3260/tcp

# Firewall-cmd-reload

This article is from the "Linux" blog, so be sure to keep this source http://yangzhiming.blog.51cto.com/4849999/1755519

REDHAT7 Building iSCSI Target