Remedy for forgetting the password of Win NT and Win 2000 Administrators

I. Generate a tool floppy disk:
1st worker: Run rawrite.exe
Xxxx. bin files are saved to c on the hard disk:
Tcrk directory;
2. Prepare a floppy disk of good quality and put it on the floppy drive. Enter the command line and format it.
A:
/U
/V: ntcrk
Format

To ensure that the floppy disk has no bad partition; enter c:
Tcrk directory, raw
/D
A:
/F
Ntcrk. img
Generate a tool disk.
2. Modify the administrator password (you do not need to know the original password ):

1. Start a faulty system (you do not need to remove the hard disk to another machine) with a tool floppy disk;
2. Press
Return/enter
To
Continue
Press enter to continue;
3. Do
You
Have
Your
NT
Disks
On
A
SCSI
Controller?
If your NT hard disk is connected

On the scsicard, Type y and press Enter. Otherwise, Type n and press Enter. If your scsicard is detected, the current hard disk is displayed.
4. What
Partition
Contains
Your
NT
Installation?
Based on the list of listed partitions, enter the name of the partition where your NT system is located, which is actually the partition where the SAM file is located, for example,/dev/hda1. The partition will be mounted to/MNT, you can see from other VCRT (ALT + F2), cd, ls ....
5. Select
What
You
Want
To
Do: 1. Change Password
----:)
6. Enter the path of the SAM file.
7. Enter the SAM file name --- use the default one.
8. list all user names in SAM. Enter the user name to be modified and use the default administrator.
9. enter a new password, such as 1234567890.
10. Are you sure you want to modify it? Y, of course.
11. If you want to change the password of another user, enter the user name to be modified. Otherwise, enter the user name! To next step

12. Write
Hive
File?
Of course, y. Otherwise, Nothing
Have
Changedxixi
13. About
To
Write
File
Back!
Do
It? Of course, y. Note that if you enter a directory other than/from another VCRT, you must first return to the/directory.

14. Congratulations !!! If your luck is as good as mine. Remove the floppy disk CTRL + ALT + DEL
To
Reboot
Into
NT use your new password to log on!
The system hard disk is connected to a special scsicard, and the drive on the floppy disk does not have the card. What should I do?
1. Floppy disk with Buslogic and Aic-7xxx family drive, the hard disk is attached to the two families of SCSI for further processing.
2. Obtain the for of a special scsicard
Linux
To the/floppy directory of the floppy disk.
3. Copy the system's SAM file to the IDE Hard Disk for processing, and then copy it back to the original system to overwrite the original SAM file.
4. Clone the system to an IDE Hard Disk for further processing.
Adam note:
The file can go to the http://www.sometips.com/soft/bd010114.bin
If you do not have rawrite.exe, you can also download a Winimage to unbind the file to a floppy disk.