Demand:
Use an extranet PC (Win7 operating system) that can be connected to the Internet. Remote access to the MAC computer under the public network Tp-link
Environment:
Mac OS-----tp-link-----------pc
Tools:
Putty TightVNC or TeamViewer
Method One
Method One:
Use TeamViewer 9. A fool's interview. It is important to note that the version number needs to be kept up-to-date, otherwise it will cause no connection. This is also a relatively simple method, just need to install the software on the local machine and remote machine and set up a good password can
Method Two:
With SSH VNC, you can simply configure the
1. First configure the sharing settings on Mac OS, open remote control and Telnet, for example the following configuration:
2. Set the port mapping of the router that is connected to Mac OS, and map the 22port to the IP of your Mac, and the specific setting method does not specify
3. Install putty and TightVNC on your local win7 computer,
The putty configuration is seen in the following example:
Tihgtvnc is logged in as follows:
3, all preparation work is ready to be able to log in putty first. Enter username and password (Mac's login username and password). After the login is successful, use the VNC login connection. will be able to remotely access the Mac OS
Another: The local PC is also the Mac OS can be directly with the command to establish SSH channel
Command: ssh-l port:127.0.0.1:5900-n [email protected]
The author did not try, should be able to
Remote access to Mac OS under router (SSH+VNC)