Operating system: Windows Server 2003
The server does not install antivirus software, in the process of installing a control in a recruit, the control was copied from another machine and was infected with the Sunway virus. After running the control setup, the machine speed starts to slow down. Immediately pull up the taskbar manager, found that the obvious virus program Logo1_.exe, after the removal of the worry, Turn on the tool autorun.exe to check the startup item, remove the suspect program from the startup item, and delete several questionable driver files in the loaded driver, including a i8042prt.sys (I look like a virus), but it's a normal procedure. Causing the system to appear in the login interface when the keyboard is not the spirit. What do we do? Find a disk repair, but right now the optical drive is unloaded. Depressed ing!
Depressed to the end, think about it. The current situation:: 1, unable to log on to the system locally, 2, temporarily unable to use the optical drive; 3, no DOS disk temporarily.
Available information to know: 1, System password 2, keyboard driver not loaded (analysis + speculation). 3. Networking
I am lazy, lazy people did not think the simplest way is not to hand (blow #¥o).
......
Since unable to log on locally, use remote login, since this machine can not load keyboard drive, use other machine keyboard drive (nonsense *¥#), but the accident machine did not open remote, had to remote to him open a remote,
Cut the crap and get into the process.
In the same LAN open another machine computer, must be the same network segment (the first three bit the same), otherwise will eject the access denied error 5.
Desktop--> My Computer--> right-click--> operation--connect to another computer. Enter the ip:192.168.0.23 of the machine. "Computer Management" (security issues) that went directly into the machine without entering a password.
Can you reload the driver directly in Device Manager? No (at least I can't), the Device Manager is read-only and cannot unload the drive. Had to open it to him remotely. Only start Terminal Service is not enough, first give him telnet opened. After the opening, enter Telnet 192.168.0.23
Welcome to the Microsoft Telnet Client
Escape character is ' Ctrl +] '
You will be sending your password information to a remote computer in the Internet area. This may not be safe. You also want to send
? (y/n): Y
Enter directly after the server, open the default share, passed a remote desktop of the program 3389.exe past,
Telnet to run the 3389.exe program directly.
Then use Remote Desktop login to enter IP, username password. Ok. See my desktop, open Device Manager,
Uninstall the device driver with question mark--> Scan detects hardware changes.
The driver reloads and the keyboard lights up again. Excited ing!