Remote ubuntu Control Using XManager in Win7

Remote Control of ubuntu remote host using XManager in Win7 connects to the ubuntu graphical terminal through xdmcp protocol, and logs on as a graphical terminal. The remote host is win7.ubuntu installed on the vmwarevm, And the ubuntu version is 10. 04. to log on to the ubuntu graphic desktop, the Xmanager local and virtual machines can connect to the network respectively. In the network adapter option of VMware, You must select to use the bridging method for access, because of the bridging method, the VMWare nic and the physical Nic should be in the same IP network segment Host ip Address: 192.168.0.100 subnet mask: 255.255.255.0 gateway 192.168.1.1ubuntu use ifconfig to view the IP address. Www.2cto.com 1. The win7 operation under win7 is very simple, you only need to disable the firewall. 2. Install the WordPress In Ubuntu. 1. First, disable the firewall. sudo ufw disable. 2. Connect Windows 7 to Ubuntu remotely. The protocol used is rdp, if sudo apt-get install xrdpsudo apt-get install vnc4server tightvncserver4 is not installed first, update the wget-c package of the gestational disease software package" http://www.netsarang.com/forum/xmanager/down?num=3526&filename=88406269da081d4091c34728c92d2c6c&savename=gdm_2320-0ubuntu1_i386.deb "-O gdm_2320-0ubuntu1_i386.deb www.2cto.com sudo dpkg-I gdm_2320-0ubuntu1_i386.deb4, in preferences-Remote Desktop, set to allow remote desktop, allow control. After this is done, check whether you can ping ubuntu. If you can ping ubuntu, continue the operation. Iii. configuration of gastribucket in Ubuntu 1. First, check whether the installation of gastribubucket $ gastribucket -- versiongabucket 2.32.12 and modify custom. conf configuration file: $ sudo gedit/etc/TPD/custom. add the following fields to the conf file: [security] DisallowTCP = false [xdmcp] Enable = truePort = 177 DisplaysPerHost = 10 note: displaysPerHost indicates the number of hosts. 3. Modify the schemas configuration file sudo gedit/etc/TPD. schemas: <schema> <key> xdmcp/Enable </key> <signature> B </signature> <default> true </default> </schema> www.2cto.com 4. Enable port 177, ensure that su is available on port 177 Do ufw allow 177 5. Restart gdmsudo/etc/init. run the Xbrowser program in xmanager2 on the windows system to create an Xmanager Session. Enter the IP address here. Do not change the other configurations, including the port number. Double-click the New Xmanager Session to view the logon page.
Author meteor