Replace the progress of the 2410 Development Board

Replace the progress of the 2410 Development Board-general Linux technology-Linux programming and kernel information. The following is a detailed description. For the first time, we successfully connected the board to Ben. We all use laptops without serial ports. I went to the computer city to buy a USB-to-serial-to-connect cable. The attached CD has a driver in windows, so there is no problem with the use. However, we hope that the working environment is in linux, so we found the pl2303 option in the kernel, and successfully connected the board with minicom. I encountered some problems in the middle. Although it was very simple afterwards, I felt almost impossible to think about it in a few moments.

The second time I found the tool chain and compiled an image file with uboot. Although it is not available, I restored the tool after the Board cannot be started. The previous two jobs were nothing, but nothing went wrong without any guidance from anyone. It was also a little progress. What is important was that we had confidence.

The third time is to get a bootloader that can be used. At least we can see the commands under uboot, but we still need to improve it. Our goal is to have at least one tftp available, in this way, you can get rid of windows-because the image can only be downloaded through the USB port, but we do not have a suitable USB driver in linux. With tftp, you can use a network cable to download the image.