Resend Windows 7 to the most comprehensive hard drive Installation Method

This Windows 7 hard disk installation method Daquan introduced Windows 7 to install a high version of Windows 7, Vista hard disk to install Windows 7, XP hard disk to install Windows 7 and other methods!
1. Install Windows 7 (Advanced edition) on Windows 7:

1. Download the Windows 7 7057 ISO image (RC or RTM) and use the virtual optical drive to copy it to a non-C disk (such as D: \ 7057)

2. Press F8 to fix the system and select the last command to fix the system. Enter "D: \ 7057 \ sources \ setup.exe" in the Command box (without quotation marks)

3. Go to the installation page and select Custom for installation.

4. Select the installation language and format the C drive.

5. OK. After installation, it is a pure system (non-Dual System ).

2. If you have a vista installation disk, the method is also very simple:

1. Download the Windows 7 7057 ISO image (RC or RTM) and use the virtual optical drive to copy it to a non-C disk (such as D: \ 7057)

2. Enable the optical drive in the BIOS to go To the Vista installation page.

3. Select repair computer in the lower left corner (automatically search for the system, and prompt to load or close the driver. Select disable to enter the Repair Option)

4. Select the last command for restoration. In the command box, enter "D: \ 7057 \ sources \ setup.exe" (without quotation marks) to start installation.

5. Select the installation language and format the C drive (even if the C drive does not have the system). 3. Install Windows 7 on the XP system:

1. Download the Windows 7 7057iso image (RC or RTM) and copy it to a non-C drive (such as D: \ 7057) with a virtual Optical Drive)

2. Put the bootmgr and boot directories under the D: \ 7057 directory (in fact, as long as the boot. SDI and BCD files) are copied to the C root directory, and a Sources folder is created under the C root directory. (Administrator permissions are not required in xp)

3. Copy boot. Win under D: \ 7057 \ sources to the Sources folder just created on drive C.

4. Run cmd as an administrator, and enter c: \ Boot \ bootsect.exe/nt60 C: The system prompts successful (that is, successful is successful !)

5. Close the CMD window and restart the computer. The installation interface is automatically displayed. Select the installation language and the appropriate time and currency display type and keyboard and input mode.

6. The "Start installation interface" appears. (Note that you do not need to click "Install now".) Click "repair mycomputer" in the lower left corner to go to "System Recovery selection ", select the last "command prompt" (commandprompt) to enter the DOS window.

7. Enter "D: \ 7057 \ sources \ setup.exe" (without quotation marks) to start installation.

8. Select the installation language and format the C drive.

4. Install Windows 7 in the Vista system (it has been proved that XP is more convenient to use this method ):

1. Download the Windows 7 7057iso image (RC or RTM) and copy it to a non-C drive (such as D: \ 7057) with a virtual Optical Drive)

2. Copy the boot, EFI, and sources folders and bootmgr from the D: \ 7057 folder to the C root directory.

3. Copy bootsect.exe under D: \ 7057 \ bootto the C root directory.

2nd requires administrator permissions

4. Run cmd as an administrator, enter c: \ bootsect.exe/nt60 C: And press enter (it is best to copy the file with spaces in the middle)

5. restart the system to automatically go to the installation page, and click repair computer repair my computer in the lower left corner)

6. Select the last command prompt and enter the DOS window. Enter D: \ 7057 \ sources \ setup.exe to enter the installation interface.

7. Select the installation language and format the C drive.

Original post address:

The most comprehensive hard disk installation method for Windows 7

Http://www.orsoon.com/Article/Article_21398.html