Resolve the wireless route connection settings that cannot be automatically connected

To solve the problem of wireless route connection settings that cannot be automatically connected, we first disable the wireless management software so that the system can manage the wireless network ., Remove the check box before you use this tool to manage your wireless network in the wireless management program. If it is an intel Wireless Network card, click "advanced" on the menu to allow windows to manage wireless wi-fi. Right-click the network neighbor on the desktop, select properties, and double-click wireless network connection in the pop-up dialog box.

 

Wireless route connection settings

 

Wireless route connection settings

 

Wireless route connection settings

 

Wireless route connection settings

 

Wireless route connection settings

 

Wireless route connection settings

 

Wireless route connection settings

 

Wireless route connection settings

The pop-up dialog box will automatically search for wireless networks. After the search is complete, select a wireless network and click the connection in the lower right corner. If the wireless network is encrypted, a password is prompted, enter the correct password and then click Connect. In this way, you can connect to the wireless network. In this dialog box, click Change preferred network order on the left. The following window is displayed, where we can perform simple management of the wireless network.

◆ Cannot be automatically connected after startup

Generally, it appears on intel's wireless network card. You can start the wireless management software and click the tool-application settings in the menu to see the automatic connection under advanced settings, by default, the first option is selected (only connect to the available network by configuration). You can select the second option (if no matching configuration option is found, connect to any available network ).

◆ Wireless route connection settings: problems that may occur when a vro or a wireless network cannot be found

First, check whether the wireless network card is enabled. First, confirm in the device manager that the driver of the wireless network card is installed, when the wireless device is on, press Fn + F2 on the keyboard at 640/6400/1501 to light up the wireless Nic indicator, and enable the wireless Nic switch at 1420/1520/1720 ), check whether the SSID broadcast is set in the vrossid.

◆ Wireless route connection settings: Find the wireless network, but cannot connect

Check whether a password is required for the network. Make sure that the password is case sensitive. Make sure that the password encryption method in the vro is the same as that in the wireless management program. If this happens, it is best to cancel the vro password and then connect to the supervisor. Secondly, check whether the IP address of the machine is disabled in the Rule settings of the vro. If this happens, the best way is to Reset the router first and restore it to the factory status and try again.

◆ Wireless route connection settings: analyzes the compatibility misunderstanding between g and B in

With the ever-decreasing price of wireless products, wireless products are not only widely used in household and small networks, but also effectively supplemented by large and medium-sized networks to achieve flexible access for mobile users. However, many users have misunderstandings about the compatibility of wireless products when purchasing and using wireless products.

Currently, there are three types of productized wireless network standards: ieee802.11b, ieee802.11g, and ieee 802.11a. The ieee802.11g provides a transmission rate of 54mbps and is compatible with the previous 11mbpsieee802. 11b standard. Therefore, it can not only provide high network bandwidth, but also protect the original investment, thus becoming a choice for wireless networks.

◆ Wireless route connection settings: ieee 802.11b and ieee 802.11g are unconditionally compatible and have good compatibility.

Although ieee 802.11b and ieee 802.11g can coexist in the network and communicate with each other, this is at the cost of performance and bandwidth. That is to say, the compatibility between the two is far from that of wireless vendors. Tip: currently, mainstream products using 802.11b include d-link 802.11b 11 mb wireless products, d-link 802.11b + 22 MB wireless products, and linksys wireless-B wireless products. Mainstream products using 802.11g include d-link 802.11g + 54mb wireless products, d-link 802.11g sans MB wireless products, and linksys lireless-g wireless products.

No peer-to-peer wireless network can be set up for the wireless route connection. Both ieee 802.11g wireless NICs and ieee802.11b wireless NICs can be used to build a peer-to-peer wireless network. Even if there is no Wireless AP, wireless communication between computers can be realized. However, the ieee802.11g and ieee 802.11b wireless network cards cannot be used to build a wireless network. Because the decoding methods of the two networks are different, direct communication is impossible and can only be achieved through Wireless AP.

Ieee 802.11b will cause a reduction in the transmission rate of ieee 802.11g. Most ieee 802.11g products provide the following working modes: mixed, g-only, or auto ). No matter which mode of work you work in, two things will certainly happen:

Once an ieee 802.11b device is connected to an ieee 802.11g wireless network, the performance of all ieee 802.11g devices will be reduced. Even if the ieee 802.11b device is in standby mode, the performance is obviously reduced. When the ieee 802.11b device is in the transmission or receiving status, the transmission rate of all ieee 802.11g devices becomes slower.

The compatibility between ieee 802.11b and ieee 802.11g is not only unconditional, but also has many problems. When a problem occurs, the network speed will be seriously reduced, therefore, these two standards cannot be seamlessly integrated as people think.

Knowledge about wireless route connection settings: ieee802.11b works in the GHz band and provides a bandwidth of up to 11 mbps. The maximum transmission distance is 50 ~ 100 meters, mature and low-cost technology, is currently the largest market share of wireless products, with a very high price-performance ratio, suitable for families or small and medium-sized enterprises.

Ieee802.11g also works in the GHz band, with a maximum bandwidth of 54 mbps and a maximum transmission distance of 50 ~ 100 meters, compatible with the ieee802.11b standard, can communicate with ieee802.11b products. Compared with ieee802.11b, ieee802.11g is more expensive and suitable for enterprise users or high-end wireless networks.

Ieee802.11a operates in the 5 GHz band with a maximum bandwidth of 54 mbps and adopts a more rigorous algorithm. However, the ieee802.11a chip is expensive and incompatible with the ieee802.11b And ieee802.11g standards, so it is already at the edge of elimination.