Download SRC and compile.
Select ext3 to compile into the kernel
I don't know why. GCC coredump has been compiled for countless times...
Finally, it succeeded after the n-th compilation.
After the kernel is installed, start ....
It doesn't matter if a bunch of USB errors are reported first. The keyboard is PS/2, and the mouse is not needed to use SSHE .... ignore...
Continue, the new hardware only finds my PS/2 mouse
Then an error occurs when starting the Nic .....
It probably means that the NIC device does not exist, but it is normal for me to use 2.4.
Google, the solution is as follows.
Disable the pnp OS settings in the BIOS (strange)
The NIC can be found after restart, but the MOD still cannot be loaded.
Dmesg indicates that the mii_ethtool_sset and other symbols cannot be found.
# Modprobe MII
# Modprobe 8139too
# Modprobe vis_rthine
I finally saw the network card.
Continue to test ADSL dialing
# IFUP ppp0
Check dmesg for a bunch of errors
Continue modprobe
There are also a bunch of firewalls under the iptable
Finally, depmod
Try restarting, OK