Rmvb suppression skills

System requirements and software code Installation

1. The main impact on compression speed is CPU horsepower! (R9 1pass is used as an example)

Generally, the compression speed is equal to the unit length by pressing the CPU with a VCD format of more than Hz such as dat/mpge. To suppress CPUs in AVI formats such as DivX, Xvid, and mpge4, at least Hz is required. Of course, the current top-level machine configuration will get a better compression speed! The CPU of the P4 series is compressed for only 20 minutes for the 42min series VCD, And the Xvid of the 90min series is compressed for 120 min-180 min.

2, followed by the operating system!

In general, win98se has the best compatibility, but because 98 memory is not well managed, the compression speed is slower. In addition, once other software operations (such as only notepad File Processing) are performed ), this operation may result in illegal operations (the direct effect is the deadlock of external subtitles, that is, no subtitles are added ). You can press the tablet in BRP, ERP, or DOS mode under 98! As long as the CPU and memory are large enough, the speed and stability are basically satisfactory!

Win2k/XP Tablet press is relatively stable and the speed is satisfactory (it may be the same as installing the hardware devices of the two systems itself). You can also run other programs at the same time, however, there are many compatibility issues. You need to upgrade the appropriate plug-in code! With the upgrade of the encoder, many compatibility problems have been solved!

3. Code installation:

The encoding plug-in can be downloaded from the shooter website (www.shooter.com.cn. I think the latest versions of common decoders have been updated. If you are familiar with Film and Television Forums, you can directly obtain updated update information on the forums. However, personal advice: it is best to develop a good habit of installing and uninstalling software. Do not install anything without any choice. The latest version may not be suitable for your current system!

Note that many plug-ins are required for normal playback of DVDRip. DVDRip encoding, such as Xvid, has developed rapidly. It is not recommended that you do not install the integrated plug-in for flat. The integrated plug-in package is recommended to install the mimi8 plug-in package, which is the only plug-in package suitable for compression.

The following scheme is recommended:

The tablet system needs to be clean. Try to install windvd, powerdvd, super decoding, and other large playback software with independent coding on different operating systems! To reduce conflicts!

DVDRip encoding installation: Because div5. * encoding is rarely used to create DVDRip, div5. * is not installed. Ffdshow is a required tool for tablet press (which is described below ). After ffdshow is installed, you must install an independent Xvid plugin, such as the two plug-ins of the shooter, to enable smooth playback of the popular Xvid format. Of course, video encoding has developed rapidly, such as VP6/wmv9/. (generally, after the mimi8 integrated plug-in package is installed, the encoding of such videos is almost OK)

Audio Plugin: Mainly AC3 encoding plugin. Use a version 0.69b or later with a window setting interface (the specific settings are described below ). When the mimi8 integrated plug-in package is installed in DST and Ogg formats, OK

Subtitle plug-in vobsub
98 Versions later than 2.14. Stable 2.23 versions are recommended.
WINXP requires a version later than 2.23. To suppress MKV, version 2.32 is required.
Recently, the old mi plug-in has a choice for these two versions!

You can use the most stable Windows Media Player that comes with windows to play the video before releasing the video. Generally, the video can be played normally, and the compression software can load and suppress the video.

4. Selection of compression software

ERP is preferred. The current version is 1.71. Supplemented by BRP. It is also wise to use Huang Xiong's software to compress command lines!
R9 Mode 1 pass suppression Setting Mode: (Advanced Settings can also be seen everywhere, you can compare the effect by yourself)

Comprehensive settings of helix (there are still a lot of people using this master software, so I will continue to introduce the configuration points)

1) Call up the Preference window in the menu bar and set the temporary directory and file storage directory, as shown in the figure below.

2) Call up audience templates for comprehensive settings

Because helix producer plus 9.0.1 has a large span between built-in templates, many of them are not required. In this way, you need to develop a more detailed scheme in audience templates ().

You can delete unnecessary bit rates. For example, less than 384k and more than 512k. The figure below shows the 10 tablet bit rates used by jrvs studio.

The figure shows that various bit rates are set on the 450 k vbr download bit rate.

The template is configured as follows:

"Constant bit rate" (fixed bit rate): that is, the real8 format, that is, the previous RM format
"Variable bit rate" (Dynamic Bit Rate): real9 format, that is, the current rmvb format
Note: you must use the real8 format to compress at a fixed bit rate.

　

For the current R10, do not use the real10 format if you want to use non-R10 audio. Audio in real10 format + R8 is just a blind eye. In the bit rate setting in the sense of compression, the so-called R10 advanced setting effect is basically no difference with R9! However, the time consumed by R10 is obvious.

"Target average bit rate" is the average bit rate mode, and the compressed file will be as close as possible to this average bit rate. You can change the bit rate to 450 K, 330 K, 350 K, 380 K, 390 K, 420 K, and K. The maximum bit rate is generally doubled. Based on my experience in rmvb suppression, the maximum bitrate of animation is 800 enough, and the maximum bitrate of live video is-K! The maximum bit rate cannot exceed 1500 kb. 1pass suppression: the initial average bit rate and the maximum bit rate have the greatest impact on dislocation. In actual compression, it is not to say that if the maximum bit rate is set, the software will use the maximum bit rate to encode high dynamic images without any control. The software controls the threshold based on the initial average bit rate. The double Bit Rate Calculation Mode of real has some inspiration!

"Target video quality" is the target quality mode. The quality of the compressed image will reach the specified standard as much as possible. It is difficult to control the size of the final RealMedia file generated using the target quality mode. Generally, 84 (that is, the 450 k vbr template) is better. However, since "target average bit rate" is used, this item is invalid.

"Target frame rate" (Frame Rate): The default value is 30, but because rmvb is a highly compressed file, there is not enough data like DVDRip to ensure the number of frames, therefore, this value must be adjusted to a smaller value. I suggest 23. In addition, my understanding of the frame rate is that, on the one hand, the frame rate is related to the smoothness of the screen, but as long as the frame rate is above 15, the human eyes cannot tell the pause. In addition, the more important aspect is that the frame rate is inversely proportional to the image quality, which has been verified in the suppression of rmvb and is also one of the basis for reducing the frame rate. In addition, the dropduplicatedframes setting in R10 actually controls the effect of Frame Rate on image quality! However, you only need to reduce the set frame rate to achieve the effect!

If you need to greatly adjust the brightness, the frame rate can be reduced to offset the slight increase in the file after the brightness increases. Frame rate reduction is the most important setting in template settings.

The following are four audio encoding modes. Although you only need to set the second one, the second one is not video encoding. For details, refer to the following solution:

We recommend that you choose 32 or 44 kbps stereo music high response-ra8 for all the four audios. To improve the software's recognition of the composite code stream. In addition, setting the audio bit rate too high is of little significance for the real format. The real format features high fidelity at a high compression rate, especially for audio.

"Advanced Video options" (Advanced attribute settings): Do not change it.

If you are interested, refer to the English description provided by the software! Use NotePad to open the bit rate file *. rpad and edit it by yourself

4) Please cancel all filter settings for helix!

Cancel this anti-intertwined option! And black edge control options

Save it as the default setting, so you don't have to set it every time.

Important auxiliary functions of ffdshow in rmvb Suppression

Ffdshow is the most important auxiliary plug-in rmvb suppression, mainly using its two functions

1. Adjust the brightness of the screen when the tablet is pressed
This is another cause of poor rmvb performance. Although many players that support the RM format can adjust the brightness, the scheduling is limited.

Set in ffdshow

The default value is 128. Generally, the value range is 140 ~ 170. We recommend that you set this value to 145. A very small number of films must be above 200 to achieve the brightening effect.

Or set them in level. Do not set the two at the same time.

The default value is 1.00, which is generally between 1.2 and 1.4. We recommend that you set this value to around 1.2.

2. About watermark Loading

It is actually to use the ffdshow subtitle function to load an SRT text subtitle (second subtitle)
Or use the AVS function of ffdshow to load SSA subtitles.
For more information, see ffdshow settings.

Increase rmvb voice
Low rmvb voices are common complaints from members. The voice of rmvb can be improved with a slight setting in compression.

1, AC3 encoded

Set

2. MP3 format

Currently, several compression software, such as ERP and BRP, have convenient sound amplification settings. Whether this option is a major indicator to determine whether a compression software is authentic.

Screen scaling and cropping

Image Scaling and image cutting are one of the characteristics of this studio. The fundamental starting point is that we realized that rmvb is a highly compressed format. In the highly compressed format, we should make a series of Optimizations to achieve a clear and small effect. The appropriate image size is the embodiment of rmvb's human nature suppression!

Resolution parameters for compression

The following lists the three main aspect ratio and the actual application conditions of resolution (image size), which must be kept in mind:

. 35 640x272 (DVDRip/rmvb); 608 x

. 85; 640x352 (DVDRip); 608x336; 576x312 (DVDRip/rmvb)

. 33-640x480; 576x432 (DVDRip );,512x384,480x360 (DVDRip/rmvb)

Note:
. 35 is a wide screen for traditional movies. The common DVDRip screen sizes are 576 × and 640 ×. The default value is used to suppress rmvb.

. 85 is the deformation wide screen of the DVD, and 640 × is the most common screen size. It can be used by default during compression. 640 x or more must be scaled. It is recommended to reach 608 x

. 33 is the standard 4: 3 full screen mode, which scales to 512x384 during compression. Most of these images are built on animated films. The animation suppression image should be uniformly scaled to this value.

Press VCD to rmvb. If the original VCD image quality is clear, you can zoom in to 400x300, 448x336, or 480X360, this can better reflect the image quality improvement brought by rmvb (in general, it means the picture is stretched ). This is not in conflict with the picture I mentioned.

Set the DVDRip image settings in ffdshow so that the compression time will not be extended.

First, set it to the zoom-out mode of lancroz in settings.

Then the screen is frozen at 512x384.

Note: ffdshow and Avi are rubber-like, so you can remove this option when suppressing other movies.

The compression time will not increase.

Vobsub image cropping Function

Select crop to in settings.

The advantage of vobsub cutting is that the subtitle position does not need to be adjusted. The DVD vob file is not supported: (I wonder if the new version is supported.

Note that ,,

Here, the image is fixed to the original image. Otherwise, the screen will be large. You can forcibly zoom in and fix the image size.

Settings of the word muge Style

The font display orientation is center (level 50) and bottom should not be too high (bottom 95)

Sub formatThe format setting of the word Mu is more troublesome and not fixed. Right-click the idx file and select "Edit with vobsub". The filter dialog box is displayed. Three items can be modified.

1. Select a language. Pay attention to this point during batch compression. Otherwise, you will find that such a file is pressed with English subtitles after you press it.

2. Font color. Select the M option and change the color. First, remember which one is checked. After selecting custom, select the box that was originally checked. Then select the font color in the remaining baskets. Generally, set two options: the font color and the font border.

3. Adjust the subtitle orientation. The two buttons on the right adjust the position. Generally, you can pull the vertical orientation of the rightmost adjustment. The figure below shows that the font is lowered after pulling up.

See the illustration:

A: Fixed language types
B/c: check which ones are checked by default.

After you tick custom, you may be confused.
It doesn't matter. Check the first two.

With experience, you can flexibly set the font color here.

Subtitles in the following colors are eye-catching.

Black border

White basket edge

White edges in blue

Corpus Luteum Black edge

SRT formatSet in vobsub, generally use white, yellow to make the word Mu color, the font is about 2 black bold, specific also depends on the word Mu length to narrow the font size. For example, if some characters have relatively long character lines, the screen may not be displayed. You need to forcibly wrap the text before opening the SRT subtitle! If the computer is installed with beautiful fonts (such as office ). In addition, you can use subresync that comes with vobsub to convert it to SSA/ass subtitles. Set more formats

Use the subresync file that comes with vobsub to modify the format. However, you must save it as the SSA/ass format to set the fixed font.

Check srt Subtitles

Vobsub229 and later versions enable more color settings

Subtitle reduction

First, use Edit with subresyn of vobsub to view the expected subtitle index number, for example, 02-Chinese (for example, this is a simplified Chinese subtitle, and click the timeline to see the subtitle effect)

Open the idx file in notepad and delete unwanted subtitle segments.
Remember to change the index segment
# Language index in use
Langidx: 2

Last Reuse
Edit with subresyn open idx and do not make any changes at this time. Save As and you will get the expected subtitles.

This is the most safe and intuitive method for compressing multi-index Subtitles into rmvb. To avoid the subtitle plug-in error [it is sometimes invalid directly in edit with vobsub ],

Suppression of bilingual AVI Files

Bilingual DVDRip is commonly seen in science and education films, such as BBC, IMAX, and Exploration Series. In addition, DVDRip of Some Hong Kong and Taiwan films may contain two channels: Chinese and Cantonese. Obviously, most of my friends like to explain in Chinese or in Mandarin. Of course, a large part of my friends also like the sound and the font.

When compressing software flags, the first channel is pressed by default, and the first channel is often explained in English or in Cantonese. For DVDRip that can normally display the word mu, the first sound is used to achieve the sound source + word Mu.

Some dual DVDRip audio synthesis problems, when not processing (shielding a channel) tablet, there will be harsh noise.

I have accumulated some experience in these problems.

Three software required: avimux_gui, vdm, and RMA

1. Check the audio of bilingual files.

The bilingual DVDRip first uses avimux_gui to check whether there are errors in audio integration. In the case of an error dialog box, separate merging and suppression! Otherwise, the pressed rmvb will produce noise.

2. avimux_gui usage skills

Avimux_gui is easy to use.

Drag the DVDRip file of the channel to be detached into the software, and click "add vidieo source"

The software analyzes the audio stream of the original file and selects the second channel. Do not change the other channels (Note whether the options are the same as those shown in the figure). Click "begin" to display the Save dialog box. After saving, the software starts to resynthesize the AVI file with only one channel.

After avimux_gui analyzes the audio track, right-click "Save as MP3 or AC3"

3. Use of vdm

When Ogg is bilingual or avimux cannot be separated, you can use vdm for processing.

4. Separation and synthesis of RMA video and audio

If there is a bilingual error, You can suppress the video and audio that are merged with rmvb first, then you can use RMA.

After avimux_gui analyzes the audio track, right-click "Save as MP3 or AC3 ". Press the MP3 or AC3 file into Rm format, and select 44 KB stereo for the audio file. You can first compress Avi into rmvb without any processing. This rmvb is generally noisy.

RMA is used as follows:
In "start-run", enter "cmd" to enter the DOS mode (2 k and XP users)
Run the CD command to enter the bin \ dos directory of RMA, for example, D: \ rma02501 \ bin \ dos.
Run the separation command
RMA-s cd2.rmvb
Several. 000. 001 files are obtained. The big one is the video we need.

Rename the previously squashed Rm-format audio in the format of a small separated file. And put it in our RMA directory. Replace a small file.

Run the merge command:
RMA-J/cd2.000 // cd2.001/02. rmvb
(Note the space in it)

Finally, index is created to obtain the official rmvb file.
RMA-I 02. rmvb

Use DTS to suppress graghedit

1. It is still the software that uses bilingual processing to extract DST audio tracks. The advantage of avimux_gui extraction is to avoid non-synchronization caused by improper settings. Suitable for fans who are familiar with rmvb suppression and outside DVDRip suppression.

2,Use graphedit to convert DST-WAV
You can download the software from the shooter network or use this tool in the mimi8 integrated plug-in package. Mimi8 is the most qualified boss for graphedit conversion!
Reference Image:

Careful friends can find that there are many ax plug-ins in this filter, which indicates that graphedit can be used to convert various video and audio files. Of course, I will check the usage, you still need to follow the specific operating system and installed plug-ins to succeed!

The speed is very fast, and the space occupied by DTs-WAV format is not large

3. Use AVS for merging and suppression!

If you are familiar with AVS and graghedit, you can save the conversion as GRF, and then combine and suppress it with AVS to avoid large-scale data conversion. However, you must note that the video and audio are not synchronized.
For example:
Video = directshowsource ("sample. Avi ")
Audio = directshowsource ("CHN. GRF ")
Audiodub (video, audio)

SSA subtitle Effects

To learn the special effects of SSA subtitles, you must master the suppression principles and techniques to achieve the icing on the cake. Do not apply special effects for special effects. Load special subtitle streams with a bit rate not lower than 280 kb.

My special effects skills do not include karaoke and drawing commands, but focus on several commonly used syntaxes and timeline nesting. For more information, see the General tutorial I posted earlier.

1. Scroll and move

Banner;
Dialogue: marked = 01.30: 00:, 0:01:28. 90, default, 0000, banner; 28; 0; 60, solemnly declare that the source and subtitle of this work are from the Internet, and the copyright belongs to the original film company. No organization or individual shall be publicly transmitted or used for any commercial profit. Otherwise, all consequences shall be borne by the organization or individual! This site and producers do not assume any legal and joint liability! Delete it within 24 hours after the download. If you like this film, please buy a genuine version! {\ Move (20, 20, 20, 20}

Or:
Dialogue: marked = 01.34: 00:, 0:00:50. 35, mine, 20, 20, 260, banner; 28; 0; 60, this work is from the Internet and is only for personal film and television production and learning exchanges, no organization or individual may be publicly transmitted or used for any commercial profit ......

The effect of the two is to scroll from right to left on the top of the video. Banner's first 260 is the orientation, indicating that it is displayed on the top, and changed to 10 or the following {\ move (20, 20, 20, 20} is removed to display at the bottom of the screen, determine the location based on your hobbies. The three parameters after Banner indicate that 28 is the rolling speed, the smaller the speed, the faster the speed. 0 is from right to left, and 1 is from left to right; 60 is the fading out, you can change the value to 100 to see the effect!

From bottom up
Dialogue: marked = 00.20: 00: 0000, 0:00:10. 10, default, 300, scroll up; 0; 40; 70, scroll up

From top down
Dialogue: marked = 00.20: 00: 0000, 0:00:10. 10, default, 300, scroll down; 0; 40; 70, scroll down

0; 300 indicates the moving distance of 40. It indicates the moving speed. The smaller the moving speed, the faster 70 indicates the fading out.

Ii. fade in and out

SSA Syntax of vobsub
\ Fade (<A1>, <A2>, <A3>, <t1>, <t2>, <t3>, <T4>) fadein: T1-> T2, fadeout: t3-> T4
\ Fad (<t1>, <t2>) fadein: Start-> Start + T1, fadeout: end-t2-> end

1. Simple fade-in and fade-out
{\ Fad (1000,100)} and {\ fad )}
The former indicates fade-in (gradually appearing), and the latter indicates fade-out (gradually disappearing)
Small Data is generally a gray value, ranging from 0 to 255. If the value exceeds 255, the value indicates the fade-out time and does not represent the gray value. The effect is the simplest fade-in and fade-out.
Big data indicates the gradient display of the effect within the time range defined by the timeline and the time range of gray-scale changes between 0 and.

2. Control fade-in and fade-out
{\ Fade (255,100,400, 10000 )}

Do not change the first three values, indicating that the gray scale appears gradually (that is, the gray scale ranges from 0 ~ And then gradually disappear (that is, the gray scale ranges from 255 to 255 ~ 0), the time for the gradual disappearance is controlled by the four following values. In the defined timeline (for example, 11 seconds), 100-4000 indicates that the effect gradually appears from 0.1 seconds (the control time of the effect is until the end of the fourth second, that is, 3.9 seconds ), 8.5-1.5 00 indicates that it gradually disappears from the second (the effect control time is seconds)

Iii. Detailed explanation of time nested control syntax Application

SSA Syntax of vobsub
\ FS <size> size
\ FSC <x/y> <percent> Scale
\ FSP <pixels> spacing
\ FR [<x/y/z>] <degrees> Rotation
\ C & H <bbggrr> & primary color

Added the \ t (, \) time control parameter to control the display of special effects. In addition, it can be nested to implement more difficult effects, such as Jitter, blinking, and discoloration.
The two values in front of \ t (10,800, 30, \...) respectively indicate the time in which (within the time range specified by the timeline) and the display time of the effect. The third value can be left blank, but the following comma must be retained. For some special effects, the third value is required for control .... Nested, but note the number of parentheses

1. Font controlled scaling {\ t (\ FS )}

Controlled amplification: {\ fs15} {\ t (0,800, \ fs30)} or {\ fs15 \ t (0,800, \ fs30 )}
Controlled reduction: {\ fs30 \ t (0,800, \ fs15 )}
Controlled zoom-in: {\ fs30 \ t (0,800, \ fs15) }{\ T (0,800, \ fs24)} or {\ fs30 \ t, \ fs15 \ t (2000,2800, \ fs24 ))}

Indicates that, within the defined timeline, the font size is reduced from 30 to 15, and the control time is reduced to 800 ms. Then, the font size is increased to 2nd seconds, the amplification time is also 800 ms. That is to say, it takes at least three seconds to complete this special effect timeline. If the timeline exceeds three seconds, the display effect after three seconds is the status after the last special effect is completed, for example, in this example, the final font is kept at the 24th

2. Font deformation and Scaling: {\ t (\ fscx) },{ \ t (\ fscy )}

Font length: {\ t (0,500, \ fscx500 )}
Font Height: {\ t (0,500, \ fscy500 )}
Font length to height: {\ t (0,500, \ fscx500, \ fscy300 )}
Extreme effects: {\ t (0,500, 1, \ fscx0, \ fscy500)} and {\ t (0,500, 1, \ fscx1000, \ fscy0 )}
The default size is fscx100 and fscy100. The extreme effect is to infinitely lengthen or flatten the font, so that the combination of timeline control can achieve light and shade, such as cool rmvb Effect

3. Font padding scaling {\ t (\ FSP )}

Generally, it is a special effect of first enlarging the spacing and then narrowing the spacing, which is more dynamic.
{\ T (0,800, \ fsp20)} {\ t (800,1300, \ fsp5)} or {\ t (0,800, \ fsp20 \ t (800,1300, \ fsp5 ))}
Generally used in combination with the {\ move ()} syntax

4. rotating special effects: {\ t (\ frx) },{ \ t (\ FRY) },{ \ t (\ FRZ )}

The rotation effect varies a lot and is a little more complicated.

X, Y, and Z indicate the degrees of rotation around the X axis, Y axis, and Z axis respectively. We recommend that you use a multiple of 90. The default value is usually the right-hand or counter-clockwise rotation.
For example
{\ T (\ frx1440)} rotates 4 circles around the X axis
{\ T (\ fry1440)} rotates 4 circles around the Y axis
{\ T (\ frz1440)} rotates 4 circles around the Z axis (windmill rotation)

Rotate in a certain direction. For better understanding, taking the Z axis rotation as an example, we can imagine it on a clock surface.
For example
{\ Frz90 \ t (30,500, \ frz0)}
{\ Frz0 \ t (30,500, \ frz90)}
{\ Frz270 \ t (30,500, \ frz180)}
... Apply.

If \ t is not added, an angle is rotated along the coordinate axis for font layout. The special effect of jitter is nested.
For example, a simple jitter effect: (pay attention to the number of parentheses)
Dialogue: marked = 01.00: 00. 30, jrvs, 0000, 51,100, {\ frz360 \ fs20 \ t (100,150, \ frz390 \ t (150,200, \ frz360 \ t, \ frz330 \ t (200,250, \ frz360 \ t (250,300, \ frz390 \ t (200,250, \ frz360 \ t (300,350, \ frz330 \ t (350,400, \ frz360 )))))))))}♀Jitter

Combining font scaling and other features to implement some simple combination effects
For example, if the Y axis of a common font is rotated or enlarged,
{\ Fs10 \ fry180 \ t (0,1500, \ fry0 \ fs25 )}

Such as combining fade-in and fade-out and moving display
Dialogue: marked = 01.00: 00:, 0:00:10. 30, default, 0000, 3000, {\ fade (60,160, 30,160, 10,300,)} {\ move )} {\ fry90} {\ t (0,300, \ fry0)} Huan
Dialogue: marked = 01.20: 00:, 0:00:10. 30, default, 0000, 3000, {\ fade (80,160, 50,160, 10,300,)} {\ move )} {\ fry90} {\ t (0,300, \ fry0)} Welcome
Dialogue: marked = 01.40: 00:, 0:00:10. 30, default, 0000, 3000, {\ fade (100,160, 70,160, 10,300,)} {\ move )} {\ fry90} {\ t (0,300, \ fry0)} Light
Dialogue: marked = 01.60: 00:, 0:00:10. 30, default, 0000, 3000, {\ fade (120,160, 90,160, 10,300,)} {\ move )} {\ fry90} {\ t (0,300, \ fry0 )}
Note: As long as the time difference is defined on the timeline, the interval is 20 seconds. copy the data in it.

5. Color Change {\ t \ C & hff80ff &}

The color syntax is not difficult. What is difficult is the choice and excessive color.
Dialogue: marked = 02.20: 00:, 0:00:02. 50, mine, hour, 0000, 290,220, {\ pos (0,300) }{\ fs60 }{\ T (, \ fs20 )} {\ C & hff80ff & }{\ fe130 \ fncomic sans MS} jrvs
Dialogue: marked = 02.50: 00:, 0:00:03. 10, mine, hour, 0000, 0,100, {\ C & hff80ff &} {\ t (100,200, \ C & h80ff00 & \ t, \ C & h808000 & \ t (200,300, \ C & h146365 & \ t (300,400, \ C & h83e4e7 &))))} {\ fe130 \ fs20 \ fncomic sans MS} {\ pos (290,220)} jrvs
Dialogue: marked = 03.10: 00:, 0:00:03. 30, mine, hour, 0000, 0,100, {\ C & hff80ff &} {\ t (100,200, \ C & h80ff00 & \ t, \ C & h808000 & \ t (200,300, \ C & h146365 & \ t (300,400, \ C & h83e4e7 &))))} {\ fe130 \ fs20 \ fncomic sans MS} {\ pos (290,220)} jrvs
Dialogue: marked = 03.30: 00:, 0:00:03. 50, mine, hour, 0000, 0,100, {\ C & hff80ff &} {\ t (100,200, \ C & h80ff00 & \ t, \ C & h808000 & \ t (200,300, \ C & h146365 & \ t (300,400, \ C & h83e4e7 &))))} {\ fe130 \ fs20 \ fncomic sans MS} {\ pos (290,220)} jrvs
Dialogue: marked = 03.50: 00:, 0:00:04. 10, mine, hour, 0000, 0,100, {\ C & hff80ff &} {\ t (100,200, \ C & h80ff00 & \ t, \ C & h808000 & \ t (200,300, \ C & h146365 & \ t (300,400, \ C & h83e4e7 &))))} {\ fe130 \ fs20 \ fncomic sans MS} {\ pos (290,220)} jrvs
Dialogue: marked = 04.10: 00:, 0:00:04. 30, mine, hour, 0000, 0,100, {\ C & hff80ff &} {\ t (100,200, \ C & h80ff00 & \ t, \ C & h808000 & \ t (200,300, \ C & h146365 & \ t (300,400, \ C & h83e4e7 &))))} {\ fe130 \ fs20 \ fncomic sans MS} {\ pos (290,220)} jrvs
Dialogue: marked = 04.30: 00:, 0:00:35. 00, mine, 0000, 290,220, {\ pos () }{\ C & hff80ff & }{\ T (, \ fry720 )} {\ fad ()} {\ fe130 \ fs20 \ fncomic sans MS} jrvs

4. Graphic character Loading

Loading images directly is not easy. Some effects can be achieved by using a variety of graphic characters. The graphic characters can be downloaded from the following all-encompassing Website:

Since it is a graphical character, use any of the above commands to implement the graphic character special effect. For example, the rotating ring in the special effect of cool.

AVS is used to suppress rmvb.

1. Flexible Loading. For example, VP6 and wmv9 can be loaded through aviscource. 120 frames of AVI can be squashed by AVS Frame Rate Conversion. Subtitles cannot be added or loaded through AVS or multiple subtitles. You can use the AVS function of ffdshow to load SSA subtitles.

2. SVCD/vob-rmvb is used to crop black edges using AVS to increase the brightness and increase the compression speed and quality (the built-in filter effect of the compression software is poor, it is also extremely time-consuming ). The vob-rmvb series produced by the Han Feng and CAT games are generally excellent. It seems that loading the field processing filter (de-drawing) is not desirable. However, 1pass compression is required to achieve better results. VCD-rmvb, using AVS to load the Flexographic filter (fluxsmooth) can indeed be significantly improved.

3. Merging and suppression of AVS. It is used for the suppression of bilingual DVDRip-rmvb (the second channel of direct synthesis and extraction). In addition, the synthesis and suppression is a new idea that I use to control the 1pass suppression dislocation, but everything is not absolute, in rare cases, the bit rate for merging and suppression is larger than that for single suppression.

AVS skills are simply summarized as above and will not be detailed.

VCD-rmvb suppression techniques

1. Copy. Generally, it is relatively safe to copy the VCD to the hard disk, and batch suppression can be achieved.

For normal films, as long as WMP can be played, it can be directly copied to the hard disk and directly pressed!

A. encrypted
Generally, you can use isobuster to read data.
For VCD encrypted by using the bad channels of the manual CD, this type of VCD must first use the recording software that can avoid the bad channels of the Manual, such as clonecd reading the CD into an image file, then, use isobuster to read the video files!

B. If WMP cannot be played, you can use vcdgear to convert it to mpge format.

Vcdgear can check files in mpge format. If the prompt in the lower right corner of the file after conversion is yellow (with mosaic) or red (with bad frames), do not suppress the VCD here, it must not be synchronized!

C. You can use vcdcutter to cut a VCD with bad frames.

2. Pay attention to the following points for VCD suppression:

A. The image is more subtle and sophisticated than 400x300! Force fixed the screen size to remove black edges on left and right

B. You can use AVS to load the softening filter to enhance the compression effect.

DVD-rmvb suppression technique (the one I used to use in the technology zone is actually my handwriting. Polo switched from the Forum of bronze, and he wrote it based on my content)
1. Rip the vob file to the hard disk.
Use smartripper to copy the vob file of the DVD to the hard disk.
1. Put the DVD into the optical drive and start smartripper. The software will automatically analyze the parameters of the IFO file to generate the vob file. For example, the main film has several chapters.
2. Set the Ripper parameter.
1) first set the output location and use the default name. The start button is displayed.

2) Select "ennable stream processing" in the stream processing column and start to select audio channels and MOOC. audio channels are used in Mandarin. If the audio channel is multi-channel (such as 5ch or 2ch) select a 2 CH channel. Do not select "others. In this way, the size of Ripper files will be much smaller. Of course, subtitles will be extracted from the CD later. You can also choose not to. Here, someone can use dvdx to convert vob into an AVI file with subtitles.

If you use a bilingual vob file, you can only rip one channel!

3) settings in setting. Set "file splitting" to Max filesize. That is to say, merge several vob files into a vob file to the hard disk, which facilitates future processing.

4) You do not need to change the other parameters, and then start ripper. Generally, we need to generate a consolidated vob file. A temporary d2v file will be generated in the output directory. If the file is not displayed, remove "demacrovision" in the settings. This process requires 15 ~ 20 min, and ensure that the output directory has at least 4 GB Space

2. Subtitle Extraction

Call up vobsub configure. Open the IFO file with the same name as vob on the DVD. Because we copy the entire segment, you do not need to select a chapter for this step. You can directly create an index to create a sub-domain that everyone is familiar. 10 ~ 15 min.

Illustration