RouterOS backup and recovery

Article Title: backup and recovery of RouterOS. Linux is a technology channel of the IT lab in China. Includes basic categories such as desktop applications, Linux system management, kernel research, embedded systems, and open source.

1. backup and recovery settings

Absolutely good stuff! Do you want to reset the firewall rules, network card settings, routes, and port ing that you have worked hard to set? This is a huge headache !!! However, ROUETOS is considerate for you. You can manually back up your settings files and restore them with only one command if needed!

You can log in with WINBOX. Do you have a file on the left with the ADMIN account? Click open, and then click BACKUP in the dialog box above. In this way, save the current settings in a file, log on to your route using IE, and use ftp: // Network Administrator Account: password @ Route IP: port. After logging on to your route, it will go to your saved file! Download it directly with IE!

When you reinstall it, you only need to get through the Intranet, use IE to log on to your route, and upload this setting file. On the left side of WINBOX, there is a TE starting with English, this is a terminal simulation. After you click it, use the following command to restore your previous settings, just as you would on the route:

System press ENTER

Backup press ENTER

Load name = enter the file name you saved

The system prompts you to restart and immediately restores it to your previous settings !!

Is it convenient and practical?

We may say that WINBOX backup is not satisfactory. We can also use terminal backup!

On the left of WINBOX, there is a TE starting with English. This is a terminal simulation. After clicking it, just like operating on the route, run the following command to back up your previous settings:

System press ENTER

Backup press ENTER

Save name = enter the file name you saved

We recommend that you use a date to indicate the file name. In this way, your file name is saved.

Use the load name command to restore...]

2. Restore the default value of the route.

If the rule or address is set incorrectly, win cannot enter the management interface, you can restore it as follows:
Use admin to log on
System press ENTER
Select y for reset
All changes will be deleted and the new installation will be restored.

This is to restore to the factory settings, which is suitable for the first time you set ROUTEOS!

3. Back up ROUTEOS

You can use GHOST8. 0 backup, note that you need TO use full backup, disk to img only.

4. Simplified Input

Is it difficult to input commands in routeos?

In fact, ROUTEOS only needs to input the first two letters...

For example, the preceding command:

System

Backup

This is to enter the Directory, which can be simplified:

Sy

Ba

You can! Very suitable for some lazy people... Haha

5. Check the disk

Use the following command to simulate a route or terminal:

System

Check-disk

Check the disk and restart it. But it is very slow, one minute a GB... Haha

6. Shutdown

You can shut down the server in WINBOX or use the following command to shut down the server:

System

Sh

... However, ROUTEOS is not well shut down. For example, you can directly turn off the power of IPCOP... ROUTEOS does not work ..

Also, in the IP---SERVICE can open or close the routing itself each port, you can do it, but the strong column asked not to close the WEB port !! Otherwise, your WINBOX cannot be connected .. You can disable the FTP function and change the port. It can be opened when it is used.

The ROUEOS function is too powerful .... It is not comparable to a common route. It supports VPPP, that is, multi-route backup. When a primary route has a problem, it can automatically call the backup route... Powerful.

Supports SNMP and can directly read data from the SNMP switch... Powerful ..