Routers and routers connect to each other detailed set of graphics and text tutorial

This article will give you a detailed account of the routing route to set the way, the following diagram shows the local area network routing between the routes: (the upper routing LAN port and the lower route LAN port is not covered)

Upper-allied Routing settings:

As usual when setting, without any difficulty, but to remember the Upper Route gateway (this example is 192.168.1.1) the following settings will be used.

Route a set:

1. The Routing LAN port IP must and the upper route LAN port IP in different IP segments

Example: the upper routing LAN port IP is 192.168.1.1, the 192.168.2.1 LAN port IP is a

2. The routing Wan Port connection type must be set to fixed IP and the IP address must be in the same network segment as the upper routing LAN port IP

Example: the upper routing LAN port IP is 192.168.1.1, and the routing Wan port IP is 192.168.1.22

3. The parallel route Lan/wan Subnet mask must be the same as the upper route

Example: the upper-upper route subnet mask is 255.255.255.0, and the sub subnet mask is 255.255.255.0

4. The routing gateway must not be consistent with the routing gateway

Example: The upper-allied routing Gateway is 192.168.1.1, and the routing gateway is 192.168.2.1

5. The Allied DNS server must be filled out as the upper Route gateway

Example: The upper-allied routing Gateway is 192.168.1.1, and the Allied DNS server IP is 192.168.1.1

Similarly, Route B is set as follows:

The benefits of this setting are available for the wireless features of the routing: