Samsung F591 series Monitor How to set up the signal source automatic detection?

Samsung F591 series Monitor How to set up the signal source automatic detection? The operation method is as follows:

1. Press the "Power" button on the back of the monitor. (The following "power" key action, all refers to this key.) ）



2. There are 5 small icons appearing at the bottom right of the screen.



3. Move the "power supply" key up.

4. Move the cursor to the location of the menu, press the "Power" button.

5. Toggle the "power" button up or down, move the cursor to "system", press "power" key.

6. Toggle the "power" button up or down, move the cursor to "source detection" and press "power" key.

7. Toggle the "power" button up or down, move the cursor to "auto" and press "power" button.

8. The signal source has become automatic detection at this time.

Warm tips:

For the use of products described above, if the machine encountered a failure, please click here to inquire Samsung Service Center, the machine sent to the service Center for inspection