Samsung S6 Mobile Phone s Health how to use? G9208 S Health Use method

S6 How to use s health test heart rate? (G9208)

S health is an application that can help you manage your health, set fitness goals, check progress, and track your overall health and fitness. If you want to use the S health test heart rate, follow these steps:

1. Under the Standby page, click "Application".



2. Click on "S Health".



3. Slide up the screen and click "Add".



4. Click "Measurement" under "heart rate".



5. Place your finger on the sensor on the back of the device.



6. The measurement results will be displayed after the measurement is completed. You can also select the current state to see if the heart rate is in a normal state under different circumstances. For example: click "Resting".



7. You can view the normal average range of "resting", click "Save" to save this measurement record.

S6 How to use s health test run? (G9208)

If you want to use the S health measurement run, follow these steps:

1. Under the Standby page, click "Application".



2. Click on "S Health".



3. Slide the screen up and click "Run" under "Start". (Note: This penalty has been opened as an example of "position".) )



4. Click "Start" again.



5. After the countdown will enter the warm-up stage.



6. Click on the "Small lock" icon, you can enter the "power-saving mode."

7. Click "Pause" to suspend the recording.

8. Click "Stop" to stop recording.



9. After reading the "Maximum duration" record, click "OK".

10. Click "Finish".

S6 How to use s health test pressure? (G9208)

To use the S health measurement pressure, follow these steps:

1. Under the Standby page, click "Application".



2. Click on "S Health".



3. Slide up the screen and click on the "+" icon.



4. Slide the screen up again, click on the "Pressure" right slider, green Representative open.





5. Click "←" to return to the S health main interface.



6. Click "Measurement" under "pressure".



7. Place your finger on the sensor on the back of the device.



8. The measurement results will be displayed after the measurement is completed. You can also select the current state, where you click on "quietly" for example.

9. Click "Save" to save this measurement record.