SCCM2012 R2 Combat Series eight: OSD (UP)--distribution of the new WINDOWS7 system

Today we will share with you the most important feature of SCCM---operating system distribution (OSD), which discusses the initial configuration of the OSD, the import of images, and the creation and editing of task sequences. and to solve the problems that you often encounter when distributing Windows7 system partition drive letter D and distributing the system very slowly waiting for these issues.
1. Pre-conditions
Before you begin operating system distribution, please ensure that you are ready to complete the following prerequisites:
Install and properly configure the DHCP server (you can refer to the article in the fourth section of this series to initialize the configuration)
New and correctly configured boundaries and boundary groups
2. OSD Initial Configuration
This section of the OSD initialization configuration work only need to do once, in the back of the OSD does not need to be configured again, when necessary, according to the actual situation appropriate modification.
2.1 Turning on the PXE service
Open the SCCM console-----Click "Manage"------"Distribution Points" and select the distribution Point (l-sccm.wangld.com) click Properties. Such as:

650) this.width=650; "title=" Open SCCM console "border=" 0 "alt=" open SCCM console "src=" http://www.ilync.cn/photos/attached/ 9e5d7b2461bf8dd02a5542a3004d512f.png "height=" 391 "/>

In the distribution point properties, switch to the PXE tab, tick "enable PXE support for clients", etc., press the flag to configure, click "Apply" to

650) this.width=650; "title=" Switch to "PXE" tab "border=" 0 "alt=" Switch to "PXE" tab "src=" http://www.ilync.cn/photos/attached/ 609cf0ab8102b7d01f1e1f62d8f78f6e.png "height=" 568 "/>
2.2 Configuring the PXE boot image
Click "Software Library"----"Boot image Package"---Select the image package "boot image" and click "Distribute Content" X64
650) this.width=650; "title=" Boot image Package "border=" 0 "alt=" Boot image Package "src=" http://www.ilync.cn/photos/attached/ 529445dbf16502880a3b08ecf95de57f.png "height=" 713 "/>

In the Distribute Content wizard, tap Next
650) this.width=650; "title=" Distribute content "border=" 0 "alt=" Distribute Content "src=" http://www.ilync.cn/photos/attached/ B3e0df2154e40a346888e1e9c3889727.png "height=" 621 "/>
Click Add, add distribution points, distribution point groups, or collections as appropriate, (typically add distribution points or distribution point groups) because I have already distributed them, there are no distribution points available in the add interface. Complete the distribution according to the wizard.

650) this.width=650; "Title=" click "Add" "border=" 0 "alt=" click "Add" "src=" http://www.ilync.cn/photos/attached/ 36303a49eda9d4f9699fa05a3fd20d41.png "height=" 597 "/>
Use the same method to complete the distribution of boot image package boot image (X86), and be sure to wait and confirm that the distribution status is green when the distribution is completed. Such as:
650) this.width=650; "title=" Boot image package "boot images" distribution "border=" 0 "alt=" Boot image package "boot images (X86)" Distribution "src="/HTTP/ Www.ilync.cn/photos/attached/f956a9e3fe409c12d3f3e2f534e34a31.png "height=" 507 "/>
2.3 Configuring the Network Access Account
On the Administration tab-site configuration-sites, select the site, select Configure Site components-Software distribution

650) this.width=650; "title=" on the Administration tab-"Site Configuration" "border=" 0 "alt=" On the Administration tab-"Site Configuration" "Src=" http://www.ilync.cn/photos/ Attached/a213df8a0b128e04eea3016f9a1338e3.png "height=" 696 "/>

On the "Network Access Account" tab, click the button to add a network access account, such as:
650) this.width=650; "Title=" on the "Network Access Account" tab "border=" 0 "alt=" on the "Network Access Account" tab "src=" http://www.ilync.cn/photos/attached/ 76b5da90228e877e8166a7090cdb0ba8.png "height=" 558 "/>
3 Importing system Images
Before importing the system image, we need to create a shared folder and place the appropriate WIM under the shared path.
650) this.width=650; "title=" put the corresponding WIM under the shared path "border=" 0 "alt=" put the corresponding WIM under the shared path "src=" http://www.ilync.cn/photos/ Attached/eaacc419e6983b4237df363f46d33fab.png "height=" 533 "/>
On the Software Library tab-operating system, right-click the operating system image and select Add Operating system Image package
650) this.width=650; "Title=" in the Software Library tab-"operating System" "border=" 0 "alt=" on the Software Library tab-"operating System" "src=" http://www.ilync.cn/photos/ Attached/4c24261336d644feae88d8c488323188.png "height=" 639 "/>
Specify a shared path to the mirrored WIM file and click "Next"
650) this.width=650; "title=" Specifies the image wim file "border=" 0 "alt=" Specify the image wim file "src=" http://www.ilync.cn/photos/attached/ 551bcf654619836e776de8ec9e01e689.png "height=" 631 "/>
Enter information about the image package and click "Next"
650) this.width=650; "title=" Enter information about the mirrored package "border=" 0 "alt=" Enter information about the mirrored package "src=" http://www.ilync.cn/photos/attached/ 2bc5a5ffee9d95f2831fcb81e516029e.png "height=" 622 "/>
After confirming the summary information, click "Next"
650) this.width=650; "title=" After confirming summary information "border=" 0 "alt=" after confirming summary information "src=" http://www.ilync.cn/photos/attached/ 378ce9d50a5dec03b8a02ef255337206.png "height=" 675 "/>
After the image has been added successfully, click "Close"
650) this.width=650; After the "title=" image has been added successfully, click "Close" "border=" 0 "alt=" after the image has been added successfully, click "Close" "src=" http://www.ilync.cn/photos/ Attached/b1078c554dd14657bb6c0e0ce9844a4d.png "height=" 626 "/>
After importing the image, click on the image package (windows732ent) that you just imported, select Properties, tick the data Access tab as shown, and fill in the corresponding shared folder name. Click "OK"
650) this.width=650; "title=" After importing the mirror, click on the image package (windows732ent) "border=" 0 "alt=" after importing the image, click on the Mirror Package (windows732ent) that you just imported, and then tap src= "Http://www.ilync.cn/photos/attached/050514b4bdea8a57d9dfe5bfa66f582c.png" height= "626"/>
Also we need to distribute the mirror package to the distribution point, select the Mirror Package "Windows732ent", click "Distribute Content" to complete the distribution according to the wizard and wait for the status to be "succeeded", such as:
650) this.width=650; "title=" Select the Mirror Package "Windows732ent", click "Distribute Content" "border=" 0 "alt=" Select the Mirror Package "Windows732ent", click "Distribute Content" "src=" Http://www.ilync.cn/photos/attached/680b7df5c6cb74276c5c9ac05c2e2eb0.png "height=" 704 "/>
3. Task Sequence
3.1 Creating a task sequence
In "Software Library"-"Operating System", right click on "Task sequence" select Create Task Sequence, select "Install Existing image package" click "Next"
650) this.width=650; "Title=" Right click on "Task sequence" select Create Task Sequence "border=" 0 "alt=" right click "Task sequence" select Create Task Sequence "src=" http://www.ilync.cn/ Photos/attached/5b6603cee151f725dd2604490e9fc835.png "height=" 635 "/>

Enter information about the task sequence---Click "Browse" to add the corresponding startup package. (My image is 32-bit, so choose X86)
650) this.width=650; "title=" Enter information about the task sequence---Click "Browse" to add the corresponding launch package "border=" 0 "alt=" to enter information about the task sequence---Click "Browse" to add the corresponding boot package "src=" http ://www.ilync.cn/photos/attached/5c2652883901d081fc7ec090e30c2857.png "height=" 637 "/>
Click "Browse" to select the image package and enable the local administrator account, click "Next"
650) this.width=650; "title=" click "Browse" to select the image package and enable the local administrator account, click "Next" "border=" 0 "alt=" click "Browse" to select the image package and enable the local administrator account, click "Next" "src=" Http://www.ilync.cn/photos/attached/0ff1f9fdfe286d404e141805df5eecad.png "height=" 643 "/>
Select "Join a Workgroup" and click "Next"
650) this.width=650; "title=" select "Join a workgroup" click "Next" "border=" 0 "alt=" select "Join Workgroup" click "Next" "Src=" http://www.ilync.cn/photos/ Attached/cae112acea93b874fec3509a54ade2b0.png "height=" 642 "/>
Click "Next" (the client Agent software will be installed automatically when the operating system is installed by default)
650) this.width=650; "title=" click "Next" (the client Agent software will be installed automatically after the operating system is installed by default) "border=" 0 "alt=" click "Next" (the client Agent software will be installed automatically when the operating system is installed by default) "Src= "Http://www.ilync.cn/photos/attached/26bd5e907d8bd489fd6d7fd25d5db3b7.png" height= "636"/>
Cancel all tick and click "Next"
650) this.width=650; "title=" Cancel all tick, click "Next" "border=" 0 "alt=" Cancel all tick, click "Next" "Src=" http://www.ilync.cn/photos/ Attached/71ee4877c13dbbd612ce28da0270c06d.png "height=" 632 "/>
Click "Next"
650) this.width=650; "title=" click "Next" "border=" 0 "alt=" click "Next" "Src=" http://www.ilync.cn/photos/attached/ 71d6e517ebaf75cfbca62f1e848cfa21.png "height=" 637 "/>
Click "Next"
650) this.width=650; "title=" click "Next" "border=" 0 "alt=" click "Next" "Src=" http://www.ilync.cn/photos/attached/ 8cbfda75ff4fa4976f50bb40ca6a9693.png "height=" 636 "/>
Click "Next" after confirming that the settings are correct
650) this.width=650; "title=" after confirming that the settings are correct, click "Next" "border=" 0 "alt=" to confirm the settings are correct, click "Next" "Src=" http://www.ilync.cn/photos/ Attached/1a6c0beded4a6e6f7443a4c2e25600f3.png "height=" 640 "/>
"Task Sequence Wizard completed successfully", click "Close"
650) this.width=650; "Title=" has been shown "Task Sequence Wizard completed successfully", click "Close" "border=" 0 "alt=" displayed "Task Sequence Wizard completed successfully", click "Close" "src="/http Www.ilync.cn/photos/attached/ee62ea337e93e77cb5f1144c6e1ee47f.png "height=" 630 "/>
3.2 Editing Task sequences
After creating the task sequence, you need to make the appropriate modifications, select the task sequence you just created (windows732ent), click "Edit", delete "-uefi" and partition the disk.
650) this.width=650; "title=" delete "-uefi to disk Partition" and partition the disk "border=" 0 "alt=" delete "Partition-uefi" and partition the disk "src="/HTTP/ Www.ilync.cn/photos/attached/2d2736234b3f51b265fa09a5e6e83c04.png "height=" 570 "/>

In the "Apply operating System"---"Options"-tick "please access content directly from distribution point"
650) this.width=650; "title=" in "Apply operating System"---"Options"-tick "please access content directly from distribution point" "border=" 0 "alt=" in "Apply operating System"---"Options"-tick "please access content directly from distribution point" " Src= "Http://www.ilync.cn/photos/attached/3be1a075293f1a5bc233190958e8d972.png" height= "559"/>
When the OSD distributes Windows 7 o'clock, the default is to leave the drive letter "C" to the system reserved partition, which causes the Windows7 system partition to be "D" after installation, so we need to create a task variable to solve the problem, such as:
Click "Add"----"General"-----"set task sequence variable"
650) this.width=650; "Title=" click "Add"----"General"-----"set Task sequence variable" "border=" 0 "alt=" click "Add"----"General"-----"set Task sequence variable" "src=" Http://www.ilync.cn/photos/attached/2fa8e5de57da4890c8a995207cb6a2bb.png "height=" 569 "/>
Add the variable "Osdpreservedriveletter" and the value "False" and click "OK" to
650) this.width=650; "title=" Add Variable "osdpreservedriveletter" and Value "False", click "OK" to "border=" 0 "alt=" Add Variable " Osdpreservedriveletter "and Value" False ", click" OK "to" src= "http://www.ilync.cn/photos/attached/ 1bafa0b850e2c91bc08c573fd4b2949c.png "height=" 567 "/>
3.3 Deployment of Task sequences
Select the task sequence and click Deploy. In the Deployment Wizard, click "Browse" to add the collection and click "Next"
650) this.width=650; "title=" Select the task sequence and click Deploy. In the Deployment Wizard, click "Browse" to add the collection, click "Next" "border=" 0 "alt=" to select the task sequence, click Deploy. In the Deployment Wizard, click "Browse" to add the collection and click "Next" "src=" http://www.ilync.cn/photos/attached/bde639a816d6f0b23b7e4c40b1910f7c.png "height = "639"/>
Select "Available" and "Media and PXE only" and click "Next"
650) this.width=650; "title=" select "Available" and "Media and PXE only", click "Next" "border=" 0 "alt=" select "Available" and "Media and PXE only", click "Next" "src="/HTTP/ Www.ilync.cn/photos/attached/ad09e30f7397dc81c3aca54e5c0bf4a3.png "height=" 613 "/>
Click "Next"
650) this.width=650; "title=" click "Next" "border=" 0 "alt=" click "Next" "Src=" http://www.ilync.cn/photos/attached/ 8ac8dcc64acf431688be917c12664846.png "height=" 631 "/>
Click "Next"
650) this.width=650; "border=" 0 "src=" http://www.ilync.cn/photos/attached/f72d226f70bfa0a4a88bf245ac6019d8.png " height= "625"/>
Click "Next"
650) this.width=650; "title=" click "Next" "border=" 0 "alt=" click "Next" "Src=" http://www.ilync.cn/photos/attached/ 071aeb9cc42c73139848c6d5b7794564.png "height=" 635 "/>
Click "Next"
650) this.width=650; "title=" click "Next" "border=" 0 "alt=" click "Next" "Src=" http://www.ilync.cn/photos/attached/ 7eb4eeca167fdb412675fd7cdea86efc.png "height=" 639 "/>

After confirming the summary information, click "Next"
650) this.width=650; "Title=" after confirming the summary information, click "Next" "border=" 0 "alt=" to confirm the summary information, click "Next" "Src=" http://www.ilync.cn/photos/ Attached/334c9f42dfacff26f25c64ce9481bc53.png "height=" 627 "/>
Wait for the Deploy Software Wizard to complete successfully click Close
650) this.width=650; "title=" Wait "Deployment Software Wizard completed successfully" click Close "" border= "0" alt= "Wait" Deployment Software Wizard completed "click" Close "src=" http://www.ilync.cn /photos/attached/f2ed01c7a9bb5d033b62ed767bf52525.png "height=" 624 "/>
4. Install the operating system
To create a new virtual machine in Hyper-V, note that the first generation is selected and set to boot from the legacy network adapter
650) this.width=650; "title=" Create a new virtual machine in Hyper-V, note Select the first generation and set to start the "border=" 0 "alt=" from the legacy network adapter to create a new virtual machine in Hyper-V, pay attention to the first generation, and set to start "src=" Http://www.ilync.cn/photos/attached/ad839cf173b79daf4d24f5a0bf22a960.png "height=" 656 "/> From the Legacy network adapter
Start the virtual machine to see that the IP address has been obtained from DHCP
650) this.width=650; "title=" starts the virtual machine and sees that it has been obtained from DHCP to the IP address "border=" 0 "alt=" to start the virtual machine, you can see that it has been obtained from DHCP to the IP address "src=" http:// Www.ilync.cn/photos/attached/402c19341d183350bf909ba9cceec7b4.png "height=" 484 "/>
When prompted to press "F12" to boot from the network, the client begins to download the package from the SCCM server
650) this.width=650; "title=" Press "F12" as prompted to start from the network, the client begins to download the package from the SCCM server "border=" 0 "alt=" according to the prompt press "F12" from the network boot, the client starts to download the package from the SCCM server " Src= "Http://www.ilync.cn/photos/attached/e9d4962e7ea13b43203cd7552ff67551.png" height= "610"/>

Enter the password set when the PXE service is turned on and click "Next"
650) this.width=650; "title=" Enter the password that is set when the PXE service is turned on, click "Next" "border=" 0 "alt=" Enter the password set when the PXE service is turned on, click "Next" "src="/HTTP/ Www.ilync.cn/photos/attached/aaea08f1268802c4b1559f04f870f68a.png "height=" 597 "/>
Select the task sequence you want to perform and click "Next"
650) this.width=650; "title=" Select the task sequence to be executed, click "Next" "border=" 0 "alt=" Select the task sequence to be executed, click "Next" "Src=" http://www.ilync.cn/ Photos/attached/f63a690a090315c5d134094a64d8837f.png "height=" 612 "/>

The task sequence has started to run, such as:
650) this.width=650; the "title=" task sequence has started to run, such as: "border=" 0 "alt=" task sequence has started to run, such as: "Src=" http://www.ilync.cn/photos/ Attached/679bf21d3420d52a5bec5c1ffe2cf440.png "height=" 568 "/>
The installation process is automatically restarted, such as
650) this.width=650; "border=" 0 "alt=" is automatically restarted during the "title=" installation Process "src=" during the installation process http://www.ilync.cn/photos/attached/ C81456af80dc5efc414a67894f6f69f5.png "height=" 545 "/>
After you restart the computer, the Configuration Manager installs the Client Agent software
650) this.width=650; "title=" After restarting the computer, the Configuration Manager installs the Client Agent software "border=" 0 "alt=" after restarting the computer and then the configuration Manager installs Client Agent software "src=" Http://www.ilync.cn/photos/attached/2404dd1382d1bf780fdab661a1c2ca7a.png "height=" 570 "/ >
After the installation is successful, enter the local administrator password to log in
650) this.width=650; After the "title=" installation succeeds, enter the local administrator password to log in "border=" 0 "alt=" after the installation is successful, enter the local administrator password to log in "src=" http://www.ilync.cn/ Photos/attached/73603233f2d50e7f31d49b91f6ebddb2.png "height=" 597 "/>
Open the computer to see the partition as we have just configured, the drive letter is also correct
650) this.width=650; "Title=" opens the computer to see the partition as we have just configured, the drive letter is also the correct "border=" 0 "alt=" to open the computer can see the partition as we have just configured, the drive letter is also the correct "src=" Http://www.ilync.cn/photos/attached/067d39974ca2078c231ef424b402ba4b.png "height=" 596 "/>
Then open the Software center, visible Client Agent software is also installed correctly.
650) this.width=650, "title=" to open the Software center, visible Client Agent software is also installed correctly. "border=" 0 "alt=" and then open the Software center, visible Client Agent software is also installed correctly. "Src=" Http://www.ilync.cn/photos/attached/bfbf8efecac7ba94e1d105f4617d392b.png "height=" 605 "/>
Today we have discussed the entire OSD process in detail and resolved the issue of distributing the WINDOWS7 system drive letter to D drive. The most important thing is not to be talked about in many documents by setting the image package for the client to read the SCCM server directly instead of directly to local, this can greatly shorten our installation time. Hope to help everyone, thank you very much for your attention.

---This document is provided by http://www.iLync.cn Huang Jinhui Original, if you have any questions, please call: 021-60745131---

This article is from the "Ilync" blog, make sure to keep this source http://ilync.blog.51cto.com/6203086/1589593

SCCM2012 R2 Combat Series eight: OSD (UP)--distribution of the new WINDOWS7 system