School bedroom How to set up a wireless router

School bedroom method of wireless router Setup

Used to be at home with a wireless router is always connected to a simple network cable to set up a variety of wireless devices at the same time the Internet, until the school found that the previous wireless router settings in the school is not feasible, because the school is fixed to each person an IP address, we only to the school to provide their own computer MAC address, Then the school will assign an IP to us. So even if the router emits a wireless signal, no other wireless device can connect directly to the Internet.

How to do it, the first in the classmate's help and my search on the internet to know the router can be changed to switch to achieve a variety of equipment of the Internet, first of all, we need the school information Office to use the Wireless network card MAC address to register an IP, Then plug the network cable into the router's LAN interface (eliminating the WAN interface) and turn on the wireless router settings to turn UPnP off, at which point the router has become a switch, and then the IP address in the Internet option settings can be online, At this point the router is equivalent to a wireless switch.

School Bedroom Wireless Router Setup method one of the disadvantages

Because the school allows only one classmate to apply for an IP, so for those who have laptops and other wireless devices, only one of the devices can be wireless Internet access, if you want to use other wireless equipment, you need to fill out the device Mac to register IP, second, because the registration of IP using the wireless network card MAC address , so if you do not want to use wireless and want to use wired Internet, you plug the network cable directly on the computer is not able to surf the Internet, you need to complete the information Office Online to fill out the local network card mac to register an IP.

School Bedroom Wireless Router Setup method two

This approach makes wireless Internet access very simple. First we register an IP (this time we can use the computer's local network card MAC address to register, instead of switching to the Mac of the wireless card, we plug the network cable into the WAN interface, let the router play its role, turn on the router settings, and fill in the campus-registered IP information in the WAN settings, Use the IP address of the 192.168.1.1 in your LAN settings, and then complete the IP address in the Internet option settings to automatically get it.

But one step, now to play the MAC address cloning function, because the school only assigns one person one IP, we register is also using a device's MAC address (the device here generally refers to the notebook computer), so in general when other wireless devices access to the router, Because the Mac of this device is not the Mac of the notebook that we fill in when we register IP, so it is not able to surf the Internet. However, when we click on the MAC address clone in the wireless router settings, that's completely different, MAC address cloning can deceive the computer, it turns the Mac of other wireless devices into the Mac of the notebook that is filled in when the IP is registered, so that even if multiple wireless devices are connected to the Internet at the same time using only a MAC address, So much more convenient.

Through the second wireless router Setup method we can enjoy more than one device wireless Internet access without the school constraints, still in the confusion you do not hurry up to try?