See if RAID is enabled under Linux

1. [Email protected] ~]$ CAT/PROC/SCSI/SCSI

2. Attached devices:

3. Host:scsi0 channel:02 id:00 lun:00

4. Vendor:dell Model:perc H710 rev:3.13

5. Type:direct-access ANSI SCSI revision:05

6. Host:scsi5 channel:00 id:00 lun:00

7. Vendor:hl-dt-st Model:dvd-rom du90n rev:d300

8. Type:cd-rom ANSI SCSI revision:05

Host Adapter Flag

The SCSI channel on the channel host adapter

SCSI Flag for ID device

Model indicates HDD model

When the value of the channel is the same as that of the ID value, the description divides a disk into multiple partitions

When the value of the channel is the same, there are multiple ID values, which means raid or LVM

This article is from the "Go Forward" blog, make sure to keep this source http://9541572.blog.51cto.com/9531572/1616558

See if RAID is enabled under Linux