Set the Windows Mobile 6.0 simulator to access the Internet

To ensure that the host is connected to the Internet, follow these steps:

1. Open ActiveSync, click "file" --> "connection settings", and select "DMA" under "allow connections to one of the following ports ".

 

2. Open vs2005, click "Tools"> "device simulation manager", and select a Windows Mobile 6 simulator. Right-click "Connect" in the menu ". After the simulator starts, click "insert base". In this case, connect to the simulator through ActiveSync and synchronize data.

 

3. In the simulator, click "start" --> "set" and click the "connection" tab.

(1) Select "Nic ":

Select "My Nic connection" and "Default unit Settings ".

Under "click the adapter to modify Settings", select "asyncmac ndiswan miniport", select "use server assigned IP Address", and click "OK" in the upper right corner ", the prompt "the new settings will be applied the next time the adapter is used. If the adapter is currently inserted into the device, remove it first, and then re-insert the adapter to apply the settings .", Click "OK" and "OK ".

 

(2) Select "connection" on the "connection" tab ":

On the "advanced" tab, click "select Network ".ProgramWhen automatically connecting to the Internet, use: "select" unit Settings "below, the default is" Internet Settings ", and then click" OK "and" OK "in the upper right corner continuously ", "X" returns.

 

4. Now, you can access the Internet. Click Start> Internet Explorer> favorites> MSN mobile to display the page. If the web page cannot be opened, select the simulator in "device simulator manager", right-click the "Remove base" button in the menu, and then click "insert base" to connect to ActiveSync again, no problem.