Set up a dhcp server in centos

Source: Internet
Author: User

Set up a dhcp server in centos
1. Install dhcp Software

[root@dns-server ~]# yum install dhcp -y
Ii. Configure dhcp Parameters
[Root @ dns-server ~] # Cat/etc/dhcp/dhcpd. conf ## DHCP Server Configuration file. # see/usr/share/doc/dhcp */dhcpd. conf. sample # see 'man 5 dhcpd. conf '# subnet 192.168.3.0 netmask 255.255.255.0 {# this is to set the ip network segment and subnet mask range 192.168.3.10 192.168.3.40; # automatically assigned ip address segment option domain-name-servers 192.168.3.1; # dns server address option domain-name "dns.test.com"; # dns server name option routers 192.168.3.254; # gateway option broadcast-address 192.168.3.255 ; # Broadcast address default-lease-time 600; max-lease-time 7200;} [root @ dns-server ~] #/Etc/init. d/dhcpd start
3. Test on the client
C: \ Documents ents and Settings \ Administrator> ipconfigWindows IP ConfigurationEthernet adapter local Connection: Connection-specific DNS Suffix.: dns.test.com IP Address ............: 192.168.3.10 Subnet Mask ...........: 255.255.255.0 Default Gateway .........: 192.168.3.254C: \ Documents ents and Settings \ Administrator>
Iv. dhcp parameter Template
[root@dns-server ~]# cat /usr/share/doc/dhcp-4.1.1/dhcpd.conf.sample # dhcpd.conf## Sample configuration file for ISC dhcpd## option definitions common to all supported networks...option domain-name "example.org";option domain-name-servers ns1.example.org, ns2.example.org;default-lease-time 600;max-lease-time 7200;# Use this to enble / disable dynamic dns updates globally.#ddns-update-style none;# If this DHCP server is the official DHCP server for the local# network, the authoritative directive should be uncommented.#authoritative;# Use this to send dhcp log messages to a different log file (you also# have to hack syslog.conf to complete the redirection).log-facility local7;# No service will be given on this subnet, but declaring it helps the # DHCP server to understand the network topology.subnet 10.152.187.0 netmask 255.255.255.0 {}# This is a very basic subnet declaration.subnet 10.254.239.0 netmask 255.255.255.224 {  range 10.254.239.10 10.254.239.20;  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;}# This declaration allows BOOTP clients to get dynamic addresses,# which we don't really recommend.subnet 10.254.239.32 netmask 255.255.255.224 {  range dynamic-bootp 10.254.239.40 10.254.239.60;  option broadcast-address 10.254.239.31;  option routers rtr-239-32-1.example.org;}# A slightly different configuration for an internal subnet.subnet 10.5.5.0 netmask 255.255.255.224 {  range 10.5.5.26 10.5.5.30;  option domain-name-servers ns1.internal.example.org;  option domain-name "internal.example.org";  option routers 10.5.5.1;  option broadcast-address 10.5.5.31;  default-lease-time 600;  max-lease-time 7200;}# Hosts which require special configuration options can be listed in# host statements.   If no address is specified, the address will be# allocated dynamically (if possible), but the host-specific information# will still come from the host declaration.host passacaglia {  hardware ethernet 0:0:c0:5d:bd:95;  filename "vmunix.passacaglia";  server-name "toccata.fugue.com";}# Fixed IP addresses can also be specified for hosts.   These addresses# should not also be listed as being available for dynamic assignment.# Hosts for which fixed IP addresses have been specified can boot using# BOOTP or DHCP.   Hosts for which no fixed address is specified can only# be booted with DHCP, unless there is an address range on the subnet# to which a BOOTP client is connected which has the dynamic-bootp flag# set.host fantasia {  hardware ethernet 08:00:07:26:c0:a5;  fixed-address fantasia.fugue.com;}# You can declare a class of clients and then do address allocation# based on that.   The example below shows a case where all clients# in a certain class get addresses on the 10.17.224/24 subnet, and all# other clients get addresses on the 10.0.29/24 subnet.class "foo" {  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";}shared-network 224-29 {  subnet 10.17.224.0 netmask 255.255.255.0 {    option routers rtr-224.example.org;  }  subnet 10.0.29.0 netmask 255.255.255.0 {    option routers rtr-29.example.org;  }  pool {    allow members of "foo";    range 10.17.224.10 10.17.224.250;  }  pool {    deny members of "foo";    range 10.0.29.10 10.0.29.230;  }}[root@dns-server ~]# 

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.